Essex · England
Bath Repair in Aingers Green
Bath repair in Aingers Green without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Repairs from £95
- A chipped rim or side
- An old repair that has yellowed or come loose
Your questions about bath repair in Aingers Green
Are there extra charges for Aingers Green?
Travel is included in the price, with the same prices everywhere we work.
What if the damage is worse than the photos show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
Can you repair a failed DIY repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Is there any odour?
Expect a mild smell while we’re working, which fades afterwards.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Bath repair at your home in Aingers Green
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles aren’t touched, and the repaired area is colour matched so it blends in. We’re often asked to fix cracks in an acrylic bath and an old repair that has yellowed or come loose, on cast iron enamel, acrylic and whirlpool & spa baths.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Aingers Green (CO7)
- Area hub
- Essex
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Also near Aingers Green
Other services in Aingers Green
Prices and what affects them
Repairs from £95. You’ll know the full cost before booking. We look at:
- The material
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- How many areas need work
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
Send photos for a quote
Before you send photos, these tips help us give you a firm price:
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- Any details about the material
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
How it works
Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow two to three hours for most chips from start to finish. Before leaving, we tell you how long to leave it and how to care for it.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can normally use the bath the following day.
Preparing for the visit
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
When a repair isn’t the answer
Before you book, it’s worth knowing the limits too:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Metal that has corroded all the way through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
Looking after it afterwards
How the surface is treated afterwards matters:
- Stick to mild cleaners and a soft cloth
- Put a towel in the bath if you are working above it
- Get a dripping tap fixed promptly
- Avoid scourers, wire wool and gritty cream cleaners
There’s nothing special to do after a repair, just sensible cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.
Repairs by material
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
What we are called out for in Aingers Green
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Customers generally contact us about:
- Deep scratches in acrylic
- Holes from dropped items
- Rust spots around the plughole
- A cracked acrylic bath
Before you book anyone
- Aftercare advice
- How long the guarantee is and what it covers
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
Covering Aingers Green
Aingers Green is about 4 miles north-west of Clacton-on-Sea, in Essex. Across the CO7 area, we come to you. Aingers Green is one of 644 places in Essex where we work. Our jobs stretch from Aingers Green to London (about 55 miles away).
Postcode districts we cover here: CO7. Jobs here include addresses on Aingers Green Road, St Mary's Road and Weeley Road. Close by, we cover South Heath (1 mile south), Great Bentley (1 mile north), Thorrington (2 miles west), Frating Green (2 miles north-west) and Frating (3 miles north-west). Within a short drive, we also cover Colchester (8 miles north-west), Clacton-on-Sea (4 miles south-east), Harwich (10 miles north-east), Camulodunum (9 miles west), Greenstead (7 miles north-west) and Tiptree (14 miles west).
Landmarks near Aingers Green
Around Aingers Green, we work in homes near Church of St Mary, Great Bentley Primary School and The Plough Inn, among other places. Aingers Green’s nearest station is Great Bentley station, roughly 0.8 miles north-west. Open spaces near Aingers Green include Howlands Marsh.
About our accreditations · Every repair comes with a one-year guarantee.
