Lincolnshire · England
Bath chip & crack repair in Alford, Lincolnshire
Bath repair in Alford without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Repairs from £95
- Rusty patches near the plughole
- An old repair that has yellowed or come loose
How we handle bath repair in Alford
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Whether it’s impact holes in acrylic and chips under the taps, we can help, on whirlpool & spa baths, acrylic and pressed steel enamel alike.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Area
- Alford (LN13)
- Area hub
- Lincolnshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What a repair can’t fix
A repair is not right for every job, including:
- A bath worn all over, where resurfacing makes more sense
- A bath that moves underfoot, until its support is fixed
- Leaking fittings, which need a plumber
If in doubt, send pictures and we will say what we think.
Materials we repair
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
Keeping it looking good
Most damage we see is avoidable. A few tips:
- A dripping tap stains enamel, so fix it early
- Do not leave a fresh chip for long
- Keep abrasive pads and gritty cleaners away from the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
A repaired bath needs no special treatment, just sensible cleaning. Avoid bleach-based and gritty cleaners.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
For landlords and businesses
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Nearby places to Alford
What else we do in Alford
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
FAQs for Alford
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
What happens once I’ve sent photos?
We review the pictures and send a fixed quote.
Can you price it without visiting?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
What we’re called out for in Alford
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
These are the problems we are asked about most:
- Damage done while the bathroom was being fitted
- Damage beneath the taps
- Scratches you can feel with a fingernail
- Rust spots around the plughole
Comparing quotes
- What happens if the damage is worse than the pictures show
- Whether the price covers travel
- How the room is protected while they work
- What prep work is covered
Repair or replace in Alford?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Alford
- A year’s guarantee on all work
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
- We leave the room as we found it
Read our prices page or guide to resurfacing and replacement costs.
Alford and the surrounding area
Alford is about 10 miles north-west of Skegness, in Lincolnshire. Whether you are in the middle of Alford or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 732 towns and villages in Lincolnshire. You can also see our page for Leeds, about 80 miles away.
We cover every part of the LN13 postcode area. We regularly work on streets such as Market Place, High Street and Station Road and the roads around them. If you are just outside Alford, we cover Mawthorpe (2 miles south), Saleby (2 miles north), Willoughby (3 miles south), Beesby (3 miles north) and Ulceby (3 miles south-west). Further out, we also cover Louth (10 miles north-west), Skegness (10 miles south-east), Horncastle (13 miles west), Mablethorpe (6 miles north-east), Sutton on Sea (5 miles north-east) and Spilsby (7 miles south-west).
Near you in Alford
Around Alford, we work in homes near St. Wilfrid's Church, Alford Primary School and Half Moon Public House and the streets around them. A little further out are Alford and District War Memorial Cottage Hospital (0.5 miles west) and Dalby Old Hall Holt (4.6 miles south-west). Green spaces nearby include Miles Cross Hill.
How the visit works
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and we start. Allow a morning or an afternoon.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Let us know if it has been repaired before
- Keep a parking space free if you can
- Open a window if you can
How to get a price
Most customers in Alford get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Advice
What affects the price in Alford
Prices start from £95. Prices are worked out job by job. The main factors are:
- Unusual colours or finishes
- Any earlier repairs that need removing first
- What kind of damage it is
- What the surface is made of
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- One sharp close-up of the damage
- Any details about the material
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
To get a price, send two or three pictures using our quote form or ring us. We’ll say immediately if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
