Highland · Scotland

Bath chip & crack repair in An t-Aodann Ban, Highland

Fixed-price bath repair in An t-Aodann Ban and the surrounding area, usually in one visit and guaranteed for a year.

  • Repairs from £95
  • A kit repair that didn’t last
  • Cracks in an acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in An t-Aodann Ban?

Keeping it looking good

It’s all simple stuff:

  • Check that an acrylic bath doesn’t move when you stand in it
  • Rinse the bath after use, especially in hard water areas
  • Have new chips seen to early
  • Fix dripping taps early to stop staining and limescale

Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.

Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.

Bath repair at your home in An t-Aodann Ban

It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We work on acrylic, roll-top & freestanding and whirlpool & spa baths, and the jobs we see most are a kit repair that didn’t last and cracks in an acrylic bath.

Your repair is guaranteed for a year, as with every job we do.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Location
An t-Aodann Ban (IV51)
Region
Highland
Guarantee
A year, on every repair
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026

Common problems we fix in An t-Aodann Ban

Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.

If you can see any of these, send us a picture:

  • Damage beneath the taps
  • A chipped rim or side
  • Hairline or through cracks in acrylic
  • Holes from dropped items

What to look for in a quote

  • How soon you can use it again
  • How the room is protected while they work
  • Whether the price is fixed and includes VAT
  • Whether a trained technician does the job

How to compare quotes

An t-Aodann Ban: your questions answered

Will the repair last?

It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.

Will I be able to see the repair?

On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.

Is a repair better than a new one?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

Do you cover An t-Aodann Ban?

Yes. We cover the entire UK and travel to An t-Aodann Ban. Send us pictures for a fixed quote, or call 0345 017 0787.

Can you redo someone else’s repair?

Yes, regularly. Removing the old work can add time, and that is in the quote.

How soon can you come?

Your quote comes with available dates. Tell us if you need it done quickly.

I rent my home. Can I book you?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

How much does bath repair cost in An t-Aodann Ban?

Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

DIY kit or professional repair?

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

What affects the price in An t-Aodann Ban

Repairs from £95. There are no hourly rates or hidden extras. The price depends on:

  • The type of damage
  • What the surface is made of
  • Doing more than one item at once
  • Where the damage is and how we get to it

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.

Quotes from your photos

Most quotes are done from photos alone. To help us price it:

  • Any details about the material
  • Your postcode, so we can check dates
  • Details of any past repairs
  • A wider photo showing the whole bath

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.

What we cannot put right

In fairness, some problems need a different fix:

  • Leaking fittings, which need a plumber
  • Acrylic cracks with no access behind them
  • Rust that has eaten right through a steel bath

Send us photos and we’ll tell you honestly before booking.

Materials we repair

  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel
  • Whirlpool & spa baths

An t-Aodann Ban and nearby

An t-Aodann Ban (Gaelic: Edinbane) is in Highland. Jobs in An t-Aodann Ban are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. An t-Aodann Ban is one of 253 towns and villages in Highland where we work.

Every address in IV51 is covered. Main roads around An t-Aodann Ban include the A850, so getting to you is simple. Other places close to An t-Aodann Ban include Clachamish (3 miles north-east), Lonmore (6 miles south-west), Kilmuir (6 miles south-west), Dunvegan (6 miles south-west) and Colbost (8 miles west). Some remote addresses need extra planning, so it’s best to call first.

Map of An t-Aodann Ban © OpenStreetMap contributors

How it works

There is not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. The job generally runs to a few hours, depending on the damage, including clearing up.

  1. First, we check the damage against your photos and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Let us know if it has been repaired before
  • Let us know about parking or access

Getting a price

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a fixed quote

Advice

Materials and what they mean for the repair

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.

For landlords and businesses

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.