South Lanarkshire · Scotland
Bath Repair for Auchenheath homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Auchenheath. Send photos for a free, fixed quote.
- Repairs from £95
- Scratches you can feel with a fingernail
- Damage beneath the taps
When we would advise against a repair
Before booking, it’s worth knowing the limits too:
- Wear across the whole surface, which needs re-enamelling
- A steel bath rusted through
- Water coming from the waste or taps rather than the bath
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
Bath repair in Auchenheath, done in place
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour-matched so it blends in. If you’re dealing with impact holes in acrylic and hairline or through cracks in acrylic, we can generally put it right, on cast iron enamel, acrylic and whirlpool & spa baths alike.
Big or small, you get the same one-year guarantee in Auchenheath and across South Lanarkshire.
- Where
- Auchenheath (ML11)
- Area hub
- South Lanarkshire
- Cover
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Your questions about bath repair in Auchenheath
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How long does the repair take to cure?
Usually within a day, depending on the repair.
Can you quote from photos?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
Is there a call-out fee?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Covering Auchenheath
Auchenheath is about 5 miles south-west of Carluke, in South Lanarkshire. Wherever you are in the ML11 postcode area, we come to you. We work in all 139 towns and villages in South Lanarkshire. Our jobs stretch from Auchenheath to Glasgow (about 19 miles away).
Here we cover the ML11 postcode area. Whether you live on Lancaster Road, Windyridge and Mossgiel or a nearby road, a technician can come to you. We also cover the places around Auchenheath: Tillietudlem (1 mile north), Dillarburn (2 miles south-east), Hazelbank (2 miles north-east), Lesmahagow (2 miles south) and Brocketsbrae (3 miles south). We also work in nearby towns such as East Kilbride (13 miles north-west), Hamilton (9 miles north-west), Cambuslang (14 miles north-west), Uddingston (13 miles north-west), Blantyre (11 miles north-west) and Larkhall (5 miles north-west).
Local landmarks in Auchenheath
Typical jobs here are in homes near Kirkmuirhill Parish Church and Lesmahagow High School, among other places. For rail, the closest station is Carluke station, roughly 4.4 miles north-east. Further afield, we also cover the area around Craignethan Castle (1.7 miles north) and Birkwood Castle (2.8 miles south). For a walk, there is Black Hill.
Landlord and trade work in Auchenheath
If you manage property in Auchenheath, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
How to care for the repair
It’s all simple stuff:
- Cover the bath during DIY or decorating
- Check that an acrylic bath does not move when you stand in it
- Get a dripping tap fixed promptly
- Get any new chip repaired before it rusts
Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
How the visit works
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and the work begins. It normally takes two to three hours for most chips, and we will keep you posted as we go.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Tell us if there are stairs or a lift
- Make sure the room can be ventilated
- Make sure the area is dry
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Read more
When to call us in Auchenheath
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal will start to rust.
Typical reasons for a call-out include:
- Chips on the rim or sides
- Scuffs and scratches in the surface
- A hole punched through by something heavy
- Cracks in an acrylic bath
Questions to ask before booking
- How soon you can use it again
- Whether a trained technician does the job
- How the colour is matched
- What aftercare is recommended
Places near Auchenheath
What else we do in Auchenheath
Why repair rather than replace?
Many people think a damaged bath means a new one. In most cases it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Our bath repair starts from £95. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Auchenheath customers choose us
- Colour-matched on site
- CHAS and Constructionline accredited
- Straight answers about what a repair can do
- No extra charge for your area
See our full price list and bath cost comparison.
How we price bath repair
Repairs from £95. We give every job a fixed quote from photos. These are the things that affect it:
- The material
- How easy the damage is to reach
- How many items we do on one visit
- Unusual colours or finishes
The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what we need:
- A wider photo showing the whole bath
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
About our accreditations · Every repair comes with a one-year guarantee.
