Fife · Scotland
Bath Repair in Auchtermuchty
Bath repair for Auchtermuchty, without a refit. Send us photos for a fixed price, then we come to you.
- Repairs from £95
- Chips under the taps
- Cracks in an acrylic bath

About our bath repair in Auchtermuchty
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can typically use the bath the following day. Whether it’s a chip where the taps sit and a failed DIY repair that’s discoloured or lifting, we can usually put it right, on roll-top & freestanding, pressed steel enamel and whirlpool & spa baths alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Auchtermuchty (KY14)
- Region
- Fife
- Cover
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026

Do you need bath repair in Auchtermuchty?
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Most people get in touch when they notice one of these:
- An old repair that has yellowed or come loose
- Hairline or through cracks in acrylic
- Chips on the rim or sides
- A chip where the taps sit
Questions to ask before booking
- What prep work is covered
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- Whether a trained technician does the job
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A steel bath rusted through
- Cracks in parts of an acrylic bath we cannot get to from below
Send us photos and we will tell you honestly before you book.
Materials we work on in Auchtermuchty
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
What affects the price in Auchtermuchty
Repairs from £95. A fixed quote means you know the cost before you book. We take into account:
- The colour and finish to match
- How much damage there is
- Whether we combine several jobs
- The type of damage
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
A couple of clear pictures is all it takes. It helps if you send:
- A photo taken from further back
- Where you are, by postcode
- Details of any past repairs
- Good light, ideally daylight, without flash glare
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
How to look after the repair
So the finish stays in good condition for years:
- Don’t leave a fresh chip for long
- Don’t leave razors or cans standing in the bath
- Check that an acrylic bath does not move when you stand in it
- Stick to mild cleaners and a soft cloth
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
What happens on the day
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for a few hours, depending on the damage from start to finish. Before leaving, we tell you when it can be used and how to care for it.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, generally by the following day, the bath is ready to use.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
- Point us to the nearest place to park
Ask for a price
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Advice
Your questions about bath repair in Auchtermuchty
Will the price change on the day?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Will there be a smell?
Expect a mild smell while we are working that clears as it cures.
Which areas do you work in?
We cover the whole UK, including Auchtermuchty and the rest of Fife. Just include your postcode and we will confirm dates.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Will I be able to see the repair?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
For anyone letting property in or around Auchtermuchty, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
Nearby places to Auchtermuchty
What else we do in Auchtermuchty
Where we work around Auchtermuchty
Auchtermuchty is about 7 miles north of Glenrothes, in Fife. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our technicians cover all 133 towns and villages across Fife. Our nearest city page is Edinburgh, about 24 miles away.
Every address in KY14 is covered, from the main roads to the quietest streets. That includes homes on High Street, Station Road and Parliament Place and the roads around them. You will find Auchtermuchty on the A91 and B936, which makes it straightforward to reach. Nearby, we also work in Dunshalt (1 mile south-east), Strathmiglo (2 miles south-west), Falkland (3 miles south-east), Grange of Lindores (3 miles north) and Newton of Falkland (3 miles south-east). We also work in nearby towns such as Kirkcaldy (12 miles south), Glenrothes (7 miles south), Leven (11 miles south-east), Cowdenbeath (14 miles south), Dysart (12 miles south) and Cupar (9 miles east).
Near you in Auchtermuchty
We visit homes around Parish Church. The nearest railway station is Ladybank station, about 4.5 miles east of the centre. Further afield, we also cover the area around Myres Castle (0.6 miles south-east). Not far away are Cash Loch and Pitcairlie Hill.
About our accreditations · Every repair comes with a one-year guarantee.

