Powys · Wales
Bath Repair in Banwy
Local bath repair for Banwy: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Impact holes in acrylic
- Chips on the rim or sides
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Bath repair in Banwy, done in place
A typical bath repair is a few hours’ work, and the bath is back in use the next day. There’s no need to book a plumber or tiler, because the bath doesn’t move. We regularly repair pressed steel enamel, cast iron enamel and whirlpool & spa baths, and people most often call us about deep scratches in acrylic and cracks in an acrylic bath.
Every repair is covered by our one-year guarantee.
- Location
- Banwy (SY21)
- County
- Powys
- Cover
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath repair costs
Prices start from £95. We give every job a fixed price from photos. This is what makes a difference:
- How much damage there is
- Unusual colours or finishes
- What the surface is made of
- How easy the damage is to reach
Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
How to get a fixed quote
Before you send photos, a few simple things make all the difference:
- Something in shot to show the size
- Where you are, by postcode
- Whether it’s been repaired or coated before
- A picture taken from further back
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
What else we do in Banwy
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Keep metal cans and razors off the surface
- Check that an acrylic bath doesn’t move when you stand in it
- Get any new chip repaired before it rusts
- Give the bath a quick rinse after use
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Your questions about bath repair in Banwy
How do I book?
Just photos, your postcode and a contact number. On the day, access to the room.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you repair something that is been repaired before?
Typically, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
Something went through my bath. Can it be fixed?
Usually. Send us a photo of the hole and one from under the bath if you can.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Do you cover the entire of Powys?
All of Powys, and the rest of the UK. There’s no extra charge for travel.
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, depending on the damage, and we finish with a tidy-up and a look at the finished work together.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, normally by the day after, the bath is ready to use.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
- Let the surface dry out before the visit
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Related advice
When a repair is not the answer
A repair isn’t right for every job, including:
- Water coming from the waste or taps rather than the bath
- Metal that has corroded all the way through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
Common problems we fix in Banwy
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Look out for any of the following:
- Chips under the taps
- A hole punched through by something heavy
- Chips caused by builders
- Rust by the waste and overflow
Comparing quotes
- Whether cleaning and preparation are in the price
- Whether a trained technician does the job
- A fixed quote, and whether VAT is included
- Whether they match the colour on site
Landlords, agents and businesses in Banwy
We work for landlords, letting agents and housing providers in Banwy as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.
Our work in Banwy
Banwy is about 16 miles north-west of Y Drenewydd, in Powys. We visit homes and businesses in Banwy and the surrounding area, so nothing has to leave your home. We work in all 234 towns and villages in Powys, from the larger towns to small villages. Our jobs stretch from Banwy to Liverpool (about 54 miles away).
Our visits in SY21 work the same way as everywhere else we cover. Close by, we cover Foel (2 miles south), Llanerfyl (4 miles south-east), Abertridwr (5 miles north-east), Pentyrch (7 miles south-east) and Dinas Mawddwy (8 miles west). Further out, we also cover Pen-y-Glodfa (15 miles south-east), Bron-y-Buckley (15 miles east), Bryn (15 miles south-east), Cegidfa (15 miles east), Llanfair Caereinion (9 miles south-east) and Llanfyllin (10 miles east).
Local landmarks in Banwy
We visit homes around Parish Church of St Tydecho, among other places. Further afield, we also cover the area around Rhos Domen (1.2 miles south-west). For a walk, there’s Moel y Tryfel and Llyn Coch-hwyad.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
