Powys · Wales
Bath Repair in Belan
Local bath repair for Belan: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- A cracked acrylic bath
- Rust by the waste and overflow
Common questions in Belan
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Will the repair last?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Can you repair a hole in a bath?
Usually, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Will the price change on the day?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
How long does the repair take to cure?
Normally by the following day, depending on the repair.
Can you redo someone else’s repair?
Usually, yes. The old repair comes out first, so let us know about it.
How we handle bath repair in Belan
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There is no plumbing to disconnect, the tiles are not touched, and the repaired area is colour matched so it blends in. If you are dealing with impact holes in acrylic and scuffs and scratches in the surface, we can help, on pressed steel enamel, whirlpool & spa baths and acrylic alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Belan (SY21)
- County
- Powys
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair can’t fix
A repair is not right for every job, including:
- A steel bath rusted through
- Leaking fittings, which need a plumber
- A bath that moves underfoot, until its support is fixed
Send us photos and we’ll tell you honestly.
What we work on
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
Also in Belan
Should you replace it?
Many people think a damaged bath means a new one. In most cases it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before booking.
What you get with us
- CHAS and Constructionline accredited
- Free fixed quotes from pictures
- One-year guarantee on every repair
- Honest advice, even when it means no job
Read our full price list and bath cost comparison.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
What we do, step by step
We begin by going over the job with you. Then the area is sheeted and masked and the work begins. It normally takes a few hours, and we will tell you if anything changes.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
What bath repair costs
Prices start from £95. You will not pay by the hour. The price depends on:
- Access to the area
- The material
- What kind of damage it is
- How hard the colour is to match
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
- What it’s made of, if you know
- A close-up of the damage, in focus
Email us photos of the damage and one of the entire item, and tell us you’re in Belan, and we’ll reply with a fixed quote.
Do you need bath repair in Belan?
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.
Typical reasons for a call-out include:
- A kit repair that didn’t last
- Chips on the rim or sides
- Snagging damage from a refit
- Chips under the taps
What to look for in a quote
- What the guarantee covers, and for how long
- What prep work is covered
- How the colour is matched
- Whether the price covers travel
Looking after it afterwards
Looking after the surface is easy:
- Cover the bath during DIY or decorating
- Check that an acrylic bath doesn’t move when you stand in it
- Get any new chip repaired before it rusts
- Clean with warm water and a mild detergent
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
Our work in Belan
Belan is about 11 miles north-east of Y Drenewydd, in Powys. Wherever you are in the SY21 postcode area, we come to you. Belan is one of 234 places in Powys we cover. Our nearest city page is Liverpool, about 54 miles away.
Every address in SY21 is within our area. From Lime Kilns Lane and Top of Belan or anywhere nearby, a technician can come to you. Other places close to Belan include Llwynderw (1 mile south-west), Tre'r llai (2 miles north-east), Y Trallwng (2 miles north-east), Leighton (2 miles east) and Brithdir (2 miles south-west). Within a short drive, we also cover Y Drenewydd (11 miles south-west), Newtown and Llanllwchaiarn (10 miles south-west), Penygloddfa (10 miles south-west), Pen-y-Glodfa (10 miles south-west), Bryn (10 miles south-west) and Cegidfa (4 miles north).
Near you in Belan
The closest station to Belan is Welshpool station, roughly 1.7 miles north-east of the centre. Well-known places in the area include Victoria Memorial Hospital (1.9 miles north-east) and Powys Castle Museum (0.9 miles north). Green spaces nearby include Cefn-hilin and Llyn Coed-y-Dinas.
About our accreditations · Every repair comes with a one-year guarantee.
