Norfolk · England
Bath Repair for Belaugh homes
Bath repair in Belaugh without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Chips under the taps
Work for landlords and builders
For anyone letting property in or around Belaugh, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Bath repair in Belaugh, done in place
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles are not touched, and the repaired area is colour matched so it blends in. Typical jobs include a chip where the taps sit and holes from dropped items, in pressed steel enamel, cast iron enamel and whirlpool & spa baths.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Belaugh (NR12)
- Region
- Norfolk
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we cannot put right
We will not take on work that will not last, so here’s what a repair can’t put right:
- Wear across the whole surface, which needs re-enamelling
- Flexing caused by a failed cradle or loose feet
- Rust that has eaten right through a steel bath
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we work on in Belaugh
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
Where we work around Belaugh
Belaugh is about 7 miles north-east of Norwich, in Norfolk. Clients in Belaugh get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Our repair technicians cover all 797 towns and villages across Norfolk.
All of NR12 is covered, from the main roads to the quietest streets. We regularly work on streets such as The Street and Top Road and the roads around them. We also travel to Heggatt Street (1 mile west), St James (1 mile north-west), Coltishall (1 mile north-west), Horstead (2 miles north-west) and Great Hautbois (2 miles north-west). Larger places within reach include Norwich (7 miles south-west), Wymondham (15 miles south-west), Sprowston (5 miles south-west), Thorpe St Andrew (6 miles south), North Walsham (7 miles north) and Caister-on-Sea (15 miles east).
What’s near Belaugh
We visit homes around Broadland High School, The Anchor pub and St John's Community Primary School and Nursery and the streets around them. The closest station to Belaugh is Hoveton & Wroxham station, about 0.8 miles east. Nearby you will also find New Farm Aviation Heritage Museum (3.1 miles west) and Hautbois Castle (2.1 miles north-west). Green spaces nearby include Ranworth Broad and Snapes Water.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Towns and villages near Belaugh
Also in Belaugh
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a few hours. If we find something your pictures didn’t show, we will explain it before carrying on.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the following day.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Tell us about parking, stairs or access
- Ensure the area is dry
Getting a price
Send us pictures of the damage and a wider shot of the entire item, with your NR12 postcode, and we will come back with a fixed quote.
Related advice
Aftercare tips
How the surface is treated afterwards matters:
- Do not leave a fresh chip for long
- Make sure an acrylic bath is firm underfoot
- A dripping tap stains enamel, so fix it early
- Do not leave razors or cans standing in the bath
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Prices start from £95. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
Why us?
- CHAS and Constructionline accredited
- We will tell you if it’s not worth repairing
- Same prices wherever you are
- Normally one visit, start to finish
Read our prices page and resurfacing vs replacement cost guide.
Signs you need bath repair in Belaugh
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
Look out for these signs:
- Chips along the edge of the bath
- Cracks in an acrylic bath
- Chips under the taps
- Rusty patches near the plughole
Questions to ask before booking
- How the colour is matched
- Who will actually do the work
- A fixed price, and whether VAT is included
- Whether cleaning and preparation are in the price
Your questions about bath repair in Belaugh
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can I get a quote without a visit?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
How long before I can use the bath?
Normally the day after. We confirm the time before we leave.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Is a holed acrylic bath repairable?
Generally. Send us a picture of the hole and one from under the bath if you can.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
About our accreditations · Every repair comes with a one-year guarantee.
