Herefordshire · England
Bath Repair in Bellamore
Bath repair in Bellamore without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- Deep scratches in acrylic
- A cracked acrylic bath
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Metal that has corroded all the way through
Send us pictures and we’ll tell you honestly.
What we work on
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
How we handle bath repair in Bellamore
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. If you are dealing with rusty patches near the plughole and chips on the rim or sides, we can help, whatever the material.
Every repair comes with our one-year guarantee.
- Area
- Bellamore (HR2)
- Area hub
- Herefordshire
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Bellamore
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How long does the repair take to cure?
Normally by the following day, depending on the repair.
What happens once I’ve sent photos?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
I tried a repair kit. Can you fix it?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before and we’ll plan for it.
Can you fix rust around the plughole?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
Bellamore and nearby
Bellamore is about 7 miles west of Hereford, in Herefordshire. We travel to homes and businesses in Bellamore and the surrounding area, so there is no workshop to go to. Our repair technicians cover all 255 towns and villages in Herefordshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 51 miles away.
Our technicians cover all of the HR2 postcode area and the streets around it. Other places close to Bellamore include Preston on Wye (1 mile north-west), Byford (1 mile north), Madley (2 miles south-east), Great Brampton (3 miles south-east) and Kingstone (3 miles south-east). Within a short drive, we also cover Hereford (7 miles east), Leominster (13 miles north-east), Redhill (7 miles east), Newton Farm (7 miles east), Whitecross (6 miles east) and Eign Hill (8 miles east).
What’s near Bellamore
We visit homes around Church of St Mary and the streets around them. Well-known places in the area include Wormhill Farm Museum (2.5 miles east) and Cublington Castle Farm (1.6 miles south-east). Not far away are Garnons Hill and Wyevale Wood.
What happens on the day
We agree an arrival time beforehand. On site, it takes a few hours, depending on the damage in most cases. We leave the room clean and ready to use once it has cured.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can typically use the bath the following day.
How to prepare
- Keep a parking space free if you can
- Ensure the room can be ventilated
- Move bottles, mats and clutter away from the area
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and you’re under no obligation.
Related advice
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
For anyone letting property in or around Bellamore, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Do not leave razors or cans standing in the bath
- A dripping tap stains enamel, so fix it early
- Put a towel in the bath if you’re working above it
- Do not scrub with anything abrasive
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: tiles along the rim typically crack when it comes out, a new panel is often needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Bellamore clients choose us
- A year’s guarantee on all work
- We come to you, anywhere in the UK
- Colour mixed on the day to match
- No need to remove anything
Take a look at our prices page or resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
Also near Bellamore
What else we do in Bellamore
Signs you need bath repair in Bellamore
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, often before anyone notices. We repair snagging damage like this regularly.
Typical reasons for a call-out include:
- Cracks in an acrylic bath
- Damage done while the bathroom was being fitted
- Scratches you can feel with a fingernail
- A failed DIY repair that’s discoloured or lifting
What to look for in a quote
- Whether the price is fixed and includes VAT
- How long the guarantee is and what it covers
- Whether the price covers travel
- Whether cleaning and preparation are in the price
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
