County Durham · England
Bath Repair in Binchester
Bath repair across Binchester and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Chips caused by builders
- A chip where the taps sit
Keeping it looking good
Simple care helps the repair last. We recommend:
- Rinse it down after each bath
- Protect the bath with a towel when doing jobs nearby
- Use a soft cloth and washing-up liquid for everyday cleaning
- Have new chips seen to early
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
Bath repair in Binchester, done in place
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, usually in a single visit. If you are dealing with cracks in an acrylic bath and impact holes in acrylic, we can help, on whirlpool & spa baths, acrylic and roll-top & freestanding alike.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Binchester (DL14)
- Area hub
- County Durham
- Warranty
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
About Binchester
Binchester is about 2 miles south-west of Spennymoor, in County Durham. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We work in all 329 towns and villages in County Durham. You can also see our page for Newcastle upon Tyne, about 21 miles away.
Postcode districts we cover here: DL14. Streets in the area include Gladstone Terrace, Granville Terrace and Peel Street. Neighbouring places we cover include Middlestone Moor (1 mile east), New Coundon (1 mile south), Todhills (2 miles north-west), Coundongate (2 miles south) and Middlestone (2 miles south-east). Further out, we also cover Durham (7 miles north-east), Consett (14 miles north-west), Newton Aycliffe (5 miles south-east), Bishop Auckland (3 miles south-west), Chester-le-Street (12 miles north) and Peterlee (13 miles north-east).
Landmarks near Binchester
We visit homes around Whitworth Park School, Church of St.Peter and Auckland Castle Park, among other places. Binchester’s nearest station is Bishop Auckland station, about 2.2 miles south-west. Further afield, we also cover the area around Auckland Castle (1.6 miles south-west) and Spanish Gallery (1.7 miles south-west).
When to call us in Binchester
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
If you can see any of these, send us a picture:
- Deep scratches in acrylic
- A chipped rim or side
- Impact holes in acrylic
- A failed DIY repair that is discoloured or lifting
Questions to ask before you book
- What the guarantee covers, and for how long
- How the room is protected while they work
- What happens if they find more damage
- How long it needs to cure
When we’d advise against a repair
Some jobs aren’t right for a repair, including:
- Leaking fittings, which need a plumber
- Wear across the whole surface, which needs re-enamelling
- Acrylic cracks with no access behind them
If in doubt, send pictures and we will say what we think.
Materials we work on in Binchester
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
How the visit works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take two to three hours for most chips. We clean up when we’re done and tell you when it’s ready to use.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Open a window if you can
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
FAQs for Binchester
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
What information do you need?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you redo someone else’s repair?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
What does bath repair cost?
Prices start from £95. We give a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item with your DL14 postcode.
How we price bath repair
Repairs from £95. There is no area surcharge for Binchester. What changes the price is:
- The size and number of damaged areas
- Unusual colours or finishes
- Whether we combine several jobs
- The material
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
Most quotes are done from photos alone. To make it quick:
- One picture of the entire bath
- The material, if you know it
- A close-up of the damage, in focus
- Natural light rather than flash
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Also near Binchester
Also in Binchester
Landlord and trade work in Binchester
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
