Kent · England
Bath chip & crack repair in Birling, Kent
Bath repair in Birling without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Repairs from £95
- Damage done while the bathroom was being fitted
- A kit repair that didn’t last
About our bath repair in Birling
Whatever the damage, the aim is the same: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Common call-outs are for scuffs and scratches in the surface and chips along the edge of the bath, across cast iron enamel, pressed steel enamel and whirlpool & spa baths.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Location
- Birling (ME19)
- Area hub
- Kent
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Birling questions
Something went through my bath. Can it be fixed?
Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
How invisible is a bath repair?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference.
Do you cover Birling?
Yes, we do. We send a technician to Birling for every job, with no extra charge for travel.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
What happens if you find more damage?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Can you repair a crack in an acrylic bath?
Frequently, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
What we’re called out for in Birling
Rust typically starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Most people contact us after spotting one of these:
- A chipped rim or side
- Rust by the waste and overflow
- Scratches you can feel with a fingernail
- A hole punched through by something heavy
What your quote should include
- Who will actually do the work
- Whether the price is fixed and includes VAT
- What happens if the damage is worse than the pictures show
- What the guarantee covers, and for how long
What we do, step by step
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to a few hours.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can generally use the bath the next day.
Before we arrive
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Read more
What else we do in Birling
Prices and what affects them
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- How hard the colour is to match
- The type of damage
- Any earlier repairs that need removing first
- Doing more than one item at once
The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.
How to get a fixed price
Before you send photos, these tips help us give you a firm price:
- One picture of the whole bath
- What it’s made of, if you know
- Where you are, by postcode
- A coin beside the damage so we can judge size
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote.
When we’d advise against a repair
Some jobs aren’t right for a repair, for example:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Cracks in acrylic we cannot reach from underneath
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Birling
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
Aftercare tips
To keep it looking its best:
- Make sure an acrylic bath is firm underfoot
- Cover the bath during DIY or decorating
- Do not scrub with anything abrasive
- Get a dripping tap fixed promptly
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Where we work around Birling
Birling is about 6 miles south-west of Chatham, in Kent. Our technicians come to clients in Birling and the surrounding area, so there’s no workshop to go to. We work in 922 places in Kent. We work right across the region, from Birling to London (25 miles away).
Every address in ME19 is covered. That includes homes on Ryarsh Road, Masters Lane and Bull Road and the roads around them. Other places close to Birling include Paddlesworth (1 mile north), Leybourne (1 mile south-east), Lunsford (1 mile east), Snodland (2 miles north-east) and Larkfield (2 miles south-east). Further out, we also cover Maidstone (6 miles south-east), Sittingbourne (14 miles east), Dartford (12 miles north-west), Sevenoaks (10 miles west), Royal Tunbridge Wells (14 miles south-west) and Gravesend (8 miles north).
Near you in Birling
Around Birling, we work in homes near Ryarsh Primary School, The Duke Of Wellington Public House and The Holmesdale School and the streets around them. You’ll also find Leybourne Lakes Country Park (1.1 miles east) and Church of All Saints (under half a mile north-east). The nearest railway station is West Malling station, about 1.8 miles south of the centre. Other landmarks nearby include Leybourne Castle (1.1 miles south-east) and Maidstone Hospital (4.5 miles south-east). Not far away are Blue Bell Hill and Burham Down.
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Repair or replace in Birling?
Many people think a damaged bath means a new one. Typically it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Fixed prices from your photos
- One visit for most repairs
- Dust sheets down, tidy finish
- Straight answers about what a repair can do
Take a look at our prices page or resurfacing vs replacement cost guide.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
We work for landlords, letting agents and housing providers in Birling as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
About our accreditations · Every repair comes with a one-year guarantee.
