Worcestershire · England
Bath chip & crack repair in Blackwell, Worcestershire
Our repair technicians come to Blackwell for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Chips under the taps
- Snagging damage from a refit
Bath repair in Blackwell without replacing anything
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. Our technicians work on acrylic, roll-top & freestanding and cast iron enamel, and people most often call us about holes from dropped items and a chip where the taps sit.
All our work comes with a one-year guarantee.
- Where
- Blackwell (B60)
- County
- Worcestershire
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Also near Blackwell
What else we do in Blackwell
How to care for the repair
Simple care helps the repair last. Our advice:
- Clean with warm water and a mild detergent
- Cover the bath during DIY or decorating
- A dripping tap stains enamel, so fix it early
- Do not scrub with anything abrasive
A repaired bath needs no special treatment, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
When to call us in Blackwell
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Keep an eye out for these signs:
- A kit repair that didn’t last
- Scratches you can feel with a fingernail
- A hole punched through by something heavy
- Rusty patches near the plughole
Questions to ask before you book
- What happens if the damage is worse than the pictures show
- Aftercare advice
- Whether there are any call-out or travel charges
- How the colour is matched
The process
There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. Most visits take two to three hours for most chips.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Avoid using the area for a few hours before we arrive
- Plan for the room to be out of bounds to pets and children
How to get a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
When a repair isn’t the answer
Not everything can be repaired, and we’d rather say so up front. We can’t fix:
- Acrylic cracks with no access behind them
- A bath worn all over, where resurfacing makes more sense
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us pictures and we will tell you honestly.
Materials we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
Prices and what affects them
Prices start from £95. We price every job individually, from your photos. The main factors are:
- How easy the damage is to reach
- Doing more than one item at once
- What kind of damage it is
- Whether old repairs or coatings need taking off
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
Most quotes are done from pictures alone. To help us price it:
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- Details of any past repairs
- A coin or ruler next to the damage for scale
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you’re under no obligation.
Repair or replace: which is better?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is often needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Our bath repair starts from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Blackwell
- Free fixed quotes from pictures
- Accredited with CHAS, Constructionline and SafeContractor
- Nothing taken out or refitted
- Colours mixed by hand to suit your surface
Take a look at our full price list and guide to resurfacing and replacement costs.
Work for landlords and builders
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
FAQs for Blackwell
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Do you come to Blackwell?
We do. We send a technician to Blackwell for every job, with no extra charge for travel.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
What areas do you cover?
Across the UK. Our prices are the same everywhere.
Is a holed acrylic bath repairable?
Normally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Our work in Blackwell
Blackwell is about 2 miles north-east of Bromsgrove, in Worcestershire. Book a date that suits you, and you will know when to expect us, so you are not left waiting in all day. Our repair technicians cover all 376 towns and villages in Worcestershire. Our nearest city page is Birmingham, about 10 miles away.
Our repair technicians cover all of B60 and the streets around it. From Station Road, Wentworth Drive and Gleneagles Drive or a nearby road, a technician can come to you. Neighbouring places we cover include Linthurst (1 mile north-west), Apes Dale (1 mile north-west), Burcot (1 mile south-west), Vigo (1 mile south) and Barnt Green (1 mile north). Larger places within reach include Worcester (14 miles south-west), Redditch (5 miles south-east), Kidderminster (10 miles west), Droitwich Spa (9 miles south-west), Stourport-on-Severn (12 miles west) and Bewdley (13 miles west).
Around Blackwell
Our customers here include homes close to Blackwell First School, North Bromsgrove High School and Church of St Catherine and the streets around them. The nearest railway station is Barnt Green station, about 1.2 miles north-east. Further afield, we also cover the area around Dolan Park Hospital (1 mile south) and Castlebourne folly (4.2 miles north-west). Open spaces near Blackwell include Christopher Cadbury Wetland Reserve and Bilberry Hill.
About our accreditations · Every repair comes with a one-year guarantee.
