Stoke-on-Trent · England
Bath Repair in Blurton
Damaged bath in Blurton? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- A cracked acrylic bath
- Chips along the edge of the bath
How we handle bath repair in Blurton
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We’re frequently asked to fix chips on the rim or sides and an old repair that has yellowed or come loose, on pressed steel enamel, whirlpool & spa baths and acrylic.
All our work comes with our one-year guarantee.
- Where
- Blurton (ST3, ST4)
- County
- Stoke-on-Trent
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Covering Blurton
Blurton is about 1 mile west of Longton, in Stoke-on-Trent. Anywhere in ST3, a technician comes to you. Blurton is one of 59 towns and villages in Stoke-on-Trent where we work. Our jobs stretch from Blurton to Manchester (about 34 miles away).
Our technicians cover all of the ST3 and ST4 postcode area and the streets around it. Streets in the area include Lundy Road, Oakwood Road and Blurton Road, and we cover them all. If you’re just outside Blurton, we cover Heron Cross (1 mile north), Dresden (1 mile east), Longton (1 mile east), Fenton (1 mile north) and Sideway (1 mile west). Larger places within reach include Hanley (3 miles north), Burslem (4 miles north), Tunstall (6 miles north-west), Smallthorne (5 miles north), Dimsdale (4 miles north-west) and Porthill (5 miles north-west).
Around Blurton
We visit homes around St Paul's, St Thomas More Catholic Academy and Blurton Primary School, among other places. For rail, the closest station is Longton station, about 1 mile north-east of the centre. Further afield, we also cover the area around The Potteries Centre (3.2 miles north) and Gladstone Pottery Museum (1.1 miles east). The countryside around Blurton includes Hem Heath Woods.
The process
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to two to three hours for most chips, including clearing up.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
Ask for a price
For a price in Blurton, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
FAQs for Blurton
Is there a call-out fee?
There is no separate call-out charge. Your fixed price includes everything.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
When can I have a bath again?
Generally the day after. We confirm the time before we leave.
Is repairing better than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Is a cracked acrylic bath repairable?
Normally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Common problems we fix in Blurton
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
If you can see any of these, send us a photo:
- Hairline or through cracks in acrylic
- Rusty patches near the plughole
- Scratches you can feel with a fingernail
- Damage beneath the taps
Comparing quotes
- How long it needs to cure
- How to look after the finish
- What the guarantee covers, and for how long
- What preparation is included
Towns and villages near Blurton
Other services in Blurton
Prices and what affects them
Prices start from £95. There is no area surcharge for Blurton. The price reflects:
- Where the damage is and how we get to it
- Unusual colours or finishes
- What the surface is made of
- Any earlier repairs that need removing first
Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
Good photos mean an accurate price. Here’s what helps:
- Any details about the material
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
Repairing versus replacing in Blurton
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. We charge the same wherever you are, with no extra for Blurton. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- Straight answers about what a repair can do
- Most jobs done in one visit
- Dust sheets down, tidy finish
- One price list for the whole UK
See our prices page and bath cost comparison.
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Honest limits
Some jobs are not right for a repair, for example:
- Rust that has eaten right through a steel bath
- Water coming from the waste or taps rather than the bath
- Acrylic cracks with no access behind them
Send us pictures and we will tell you honestly.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
How to look after the repair
Most damage we see is avoidable. These habits help:
- Get any new chip repaired before it rusts
- Clean with warm water and a mild detergent
- Put a towel in the bath if you’re working above it
- Rinse the bath after use, especially in hard water areas
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
About our accreditations · Every repair comes with a one-year guarantee.
