Inverclyde · Scotland
Bath Repair for Bogston homes
Bath repair for Bogston, without a refit. Get a fixed price from your photos, then we come to you.
- Repairs from £95
- A kit repair that didn’t last
- Chips under the taps
Bath repair in Bogston, done in place
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. We regularly repair pressed steel enamel, cast iron enamel and roll-top & freestanding, and common reasons people contact us are chips along the edge of the bath and damage beneath the taps.
All our work is covered by a one-year guarantee, wherever you are in Inverclyde.
- Area
- Bogston (PA14, PA15)
- Area hub
- Inverclyde
- Warranty
- A year, on every repair
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
Swapping a damaged bath for a new one usually means a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. A repair deals only with the damage in a single visit. Prices start from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
- Repair technicians who travel to you, UK-wide
- Colours mixed by hand to suit your surface
Read our full price list and resurfacing vs replacement cost guide.
Also near Bogston
Other services in Bogston
Bogston: your questions answered
Do you work in Bogston?
We do. Repair technicians travel to Bogston from across the region, and the price is the same as everywhere else.
What happens next?
We review the photos and send a fixed quote.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you repair a crack in an acrylic bath?
Usually, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
How do I get a price for bath repair in Bogston?
Repairs from £95. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo with your PA14 postcode.
Is there a guarantee?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Can you redo someone else’s repair?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Bogston and the surrounding area
Bogston is about 1 mile north-west of Port Glasgow, in Inverclyde. Anywhere in PA14, a technician comes to you. Bogston is one of 19 places in Inverclyde we cover. Our jobs stretch from Bogston to Glasgow (18 miles away).
Every address in PA14 and PA15 is within our area. Local streets include Glen Avenue, Bogston Lane and Devol Avenue, all of which we cover. If you’re just outside Bogston, we cover Port Glasgow (1 mile south-east), Cartsdyke (1 mile west), Mid Auchinleck (2 miles south-east), Bardrainney (2 miles south-east) and Woodhall (2 miles east). Further out, we also cover Gourock (4 miles west), Kilmacolm (4 miles south-east), Braeside (4 miles west), Inverkip (7 miles west), Branchton (4 miles west) and Midton (5 miles west).
What’s near Bogston
Around Bogston, we work in homes near Wellington Academy and West Church (Port Glasgow) and the streets around them. There is a railway station in Bogston itself: Bogston station. Nearby you’ll also find Oak Mall (2.2 miles west) and Newark Castle (1.1 miles east). For a walk, there’s Lyle Hill.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
When to call us in Bogston
Glass and heavy bottles cause more chips than anything else. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Send us a picture if you notice any of these:
- Holes from dropped items
- Cracks in an acrylic bath
- Scuffs and scratches in the surface
- Chips along the edge of the bath
Comparing quotes
- Whether a trained technician does the job
- What prep work is covered
- The length of the guarantee and what it covers
- Whether they match the colour on site
Honest limits
It helps to know what we cannot do too:
- Metal that has corroded all the way through
- Leaking fittings, which need a plumber
- A bath that moves underfoot, until its support is fixed
Not sure? Send photos and we will give you a straight answer before booking.
What we work on
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
How we price bath repair
Prices start from £95. We charge the same across the UK, including Bogston. The price reflects:
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- Access to the area
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.
Quotes from your pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- Details of any past repairs
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- A wider photo showing the whole bath
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
What we do, step by step
We turn up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take two to three hours for most chips, and the room is left clean and tidy.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Clear the area around the damage
- Mention any earlier repairs or resurfacing
- Let the surface dry out before the visit
Ask for a price
If you’re in Bogston and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Landlord and trade work in Bogston
Housing associations and facilities teams use us for planned and reactive repairs in Inverclyde and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
