East Riding of Yorkshire · England

Bath chip & crack repair in Booth, East Riding of Yorkshire

Our repair technicians come to Booth for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.

  • Repairs from £95
  • Chips caused by builders
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Booth

How we handle bath repair in Booth

We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can typically use the bath the day after. We’re frequently asked to fix chips under the taps and impact holes in acrylic, on pressed steel enamel, cast iron enamel and roll-top & freestanding.

A one-year guarantee comes as standard, so you are covered after the visit.

Where
Booth (DN14)
County
East Riding of Yorkshire
Cover
A year, on every repair
Quotes
From £95. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

When to call us in Booth

Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.

The things clients normally mention when they call are:

  • Chips caused by builders
  • A failed DIY repair that’s discoloured or lifting
  • A chip where the taps sit
  • Scratches you can feel with a fingernail

Comparing quotes

  • How to look after the finish
  • Whether the price covers travel
  • What the guarantee covers, and for how long
  • What protection goes down before work starts

10 questions to ask before booking

The process

There is not much you need to do on the day. Let us in and show us the room, and we will get on with it. The job generally runs to a few hours, depending on the damage, tidy-up included.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Before we arrive

  • Mention if the room is upstairs or in a flat
  • Have somewhere for us to park nearby if possible
  • Keep children and pets away from the room on the day

Getting a price

We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

Get a fixed quote

Advice

What we can’t put right

We will not take on work that won’t last, so these are the limits:

  • Wear across the entire surface, which needs re-enamelling
  • Metal that has corroded all the way through
  • Cracks in acrylic we can’t reach from underneath

Not sure? Send photos and we’ll give you a straight answer.

Materials we repair

  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

Keeping it looking good

It’s all simple stuff:

  • Stick to mild cleaners and a soft cloth
  • Get any new chip repaired before it rusts
  • Don’t leave razors or cans standing in the bath
  • Give the bath a quick rinse after use

Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.

If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.

Questions from Booth

When can I have a bath again?

Most baths can be used the following day. We confirm the time before we leave.

When can you do it?

That depends on our diary for your area. We’ll offer you dates when we send your quote.

How much does bath repair cost in Booth?

Repairs from £95. Every job gets a fixed price from your photos. Send a close-up and a photo of the entire item and your postcode.

Do you work for landlords and businesses?

Yes, often. We can quote for several properties together and work between tenancies.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

Is a holed acrylic bath repairable?

In most cases. Photos of the hole and the underside help us check.

How do I book?

A close-up, a wider photo and your postcode. Then we will agree a date.

What affects the price in Booth

Repairs from £95. Prices are worked out job by job. What matters most is:

  • The colour and finish to match
  • The size and number of damaged areas
  • The type of damage
  • Any earlier repairs that need removing first

The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.

How to get a fixed quote

Most quotes are done from photos alone. To help us price it:

  • Details of any past repairs
  • A clear, close picture of the problem area
  • The postcode, so we can plan the visit
  • Any details about the material

Email us a picture of the damage and one of the whole item, and tell us you are in Booth, and we’ll reply with a fixed price.

Different materials, different repairs

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Landlords, agents and businesses in Booth

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Covering Booth

Booth is about 2 miles north of Goole, in East Riding of Yorkshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Booth is one of 299 places in East Riding of Yorkshire we cover. Our nearest city page is Leeds, about 28 miles away.

Postcode districts we cover here: DN14. Streets in the area include Booth Ferry Road and Boothferry Road. We also cover the places around Booth: Knedlington (1 mile north), Howdendyke (1 mile east), Howden (1 mile north-east), Kilpin Pike (1 mile east) and Hook (2 miles south-east). We also work in nearby towns such as Pocklington (14 miles north), Market Weighton (13 miles north-east), Brough (13 miles east), South Cave (12 miles east), Elloughton (13 miles east) and Snaith (7 miles south-west).

Local landmarks in Booth

Our clients here include homes close to Church of St David, Airmyn Park Primary School and Howden School and the streets around them. For rail, the closest station is Goole station, about 2 miles south. Other landmarks nearby include Goole and District Hospital (1.2 miles south-east).

Map of Booth © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.