Worcestershire · England

Bath Repair for Bouts homes

We travel to Bouts for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Scratches you can feel with a fingernail
  • Cracks in an acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Bouts

What we do, step by step

The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes two to three hours for most chips. Before we leave, we explain the curing time and the aftercare.

  1. First, we check the damage against your photos and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Move bottles, mats and clutter away from the area
  • Avoid using the area for a few hours before we arrive
  • Let us know which floor the room is on

Getting a price

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.

Get a free quote

Related advice

How we handle bath repair in Bouts

Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. Our repair technicians work on cast iron enamel, acrylic and roll-top & freestanding, and the jobs we see most are chips caused by builders and chips under the taps.

You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Location
Bouts (WR7)
Area hub
Worcestershire
Cover
12 months on all our work
Price
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

Why repair rather than replace?

If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • Same prices wherever you are
  • One-year guarantee on every repair
  • One visit for most repairs
  • We will tell you if it’s not worth repairing

Read our pricing and resurfacing vs replacement cost guide.

For landlords and businesses

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

We carry out planned and one-off repairs for housing associations and facilities teams in Worcestershire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Different materials, different repairs

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.

What we cannot put right

A repair is not right for every job, for example:

  • Flexing caused by a failed cradle or loose feet
  • Metal that has corroded all the way through
  • Cracks in acrylic we can’t reach from underneath

If in doubt, send photos and we will say what we think before booking.

What we work on

  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding

What affects the price in Bouts

Prices start from £95. Prices are worked out job by job. The main factors are:

  • How many items we do on one visit
  • The type of damage
  • Unusual colours or finishes
  • What the surface is made of

We charge the same wherever you are, with no extra for Bouts. The job itself decides the price: the material, the amount of damage and how many items.

Quotes from your pictures

You can typically get a fixed quote without us visiting. To make it quick:

  • The postcode, so we can plan the visit
  • What it’s made of, if you know
  • A close-up of the damage, in focus
  • Natural light rather than flash

Send us a photo of the damage and a wider shot of the whole item, with your WR7 postcode, and we will come back with a fixed quote.

Our work in Bouts

Bouts is about 5 miles south of Redditch, in Worcestershire. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Bouts is one of 376 places in Worcestershire we cover. Our nearest city page is Birmingham, about 17 miles away.

We work across the WR7 postcode area. If you are just outside Bouts, we cover Holberrow Green (1 mile west), Shurnock (1 mile north), Cladswell (1 mile east), Edgiock (1 mile north-east) and New End (1 mile north-east). We also work in nearby towns such as Worcester (11 miles west), Redditch (5 miles north), Bromsgrove (8 miles north-west), Droitwich Spa (9 miles west), Evesham (10 miles south) and Pershore (9 miles south-west).

Local landmarks in Bouts

Our clients here include homes close to Ridgeway Middle School. A little further out are Inkberrow Castle (1.3 miles south-west) and Alexandra Hospital (4 miles north-east). For a walk, there is River Arrow Nature Reserve.

Map of Bouts © OpenStreetMap contributors

Bouts questions

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as householders.

Can you repair a hole in a bath?

Often, if there is access underneath. We back the hole, fill it and refinish the surface.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Do you repair coloured baths?

Yes. We mix the colour on the day to match, including older coloured suites.

How long does the repair take to cure?

Typically within a day, though it depends on what we have done.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

How do I get a price for bath repair in Bouts?

Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.

Can rust on a bath be repaired?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

Keeping it looking good

Nothing complicated is needed, just a few sensible habits:

  • Get any new chip repaired before it rusts
  • Cover the bath during DIY or decorating
  • Rinse the bath after use, especially in hard water areas
  • Clean with warm water and a mild detergent

Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.

Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.

DIY kit or professional repair?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.