Worcestershire · England
Bath chip & crack repair in Branson's Cross, Worcestershire
Fixed-price bath repair in Branson's Cross and the surrounding area, normally in one visit and guaranteed for a year.
- Repairs from £95
- Rust by the waste and overflow
- A failed DIY repair that’s discoloured or lifting
Bath repair in Branson's Cross without replacing anything
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We are frequently asked to fix impact holes in acrylic and hairline or through cracks in acrylic, in acrylic, cast iron enamel and whirlpool & spa baths.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Where
- Branson's Cross (B98)
- Area hub
- Worcestershire
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath repair in Branson's Cross?
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
It’s worth getting a quote if you see:
- Snagging damage from a refit
- Damage beneath the taps
- Cracks in an acrylic bath
- Rusty patches near the plughole
Comparing quotes
- How changes to the job are handled
- The length of the guarantee and what it covers
- Is the price fixed, and does it include VAT?
- Whether there are any call-out or travel charges
Towns and villages near Branson's Cross
More services for Branson's Cross
Where we work around Branson's Cross
Branson's Cross is about 4 miles north-east of Redditch, in Worcestershire. We visit homes and businesses in Branson's Cross, so you don’t need to take anything anywhere. Our repair technicians cover 376 places across Worcestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 10 miles away.
Every address in B98 is within our area. Streets in the area include Beoley Lane and Seafield Lane, all of which we cover. Neighbouring places we cover include Pink Green (1 mile south), Aspley Heath (1 mile east), Rushbrook (1 mile north-east), Holt End (1 mile south-west) and Heath Green (1 mile north-west). Further out, we also cover Redditch (4 miles south-west), Bromsgrove (8 miles west), Droitwich Spa (13 miles south-west), Matchborough (3 miles south), Chawson (14 miles west) and Stoke Heath (9 miles west).
Around Branson's Cross
The nearest railway station is Wood End station, about 1.4 miles north-east of the centre. Other landmarks nearby include Beoley (1.6 miles south-west) and Earlswood Village Museum (3.1 miles north-east). Open spaces near Branson's Cross include Henley Sidings.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
What a repair cannot fix
To be straight with you, there are a few things a repair will not fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaks from the waste or overflow fittings (a plumber’s job)
- Wear across the whole surface, which needs re-enamelling
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Branson's Cross
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Worcestershire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Why repair rather than replace?
People often assume a cracked or chipped bath has to come out. Typically it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Prices start from £95. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- One-year guarantee on every repair
- We leave the room as we found it
- Fixed prices from your pictures
- Nothing taken out or refitted
See our prices page and guide to resurfacing and replacement costs.
Questions from Branson's Cross
Is repairing better than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Can you repair a failed DIY repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
How much does bath repair cost in Branson's Cross?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
How invisible is a bath repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
What happens once I’ve sent pictures?
We come back with a fixed quote, plus dates. There is no obligation to book.
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
Is a holed acrylic bath repairable?
Often, if there is access underneath. The hole is backed, filled and refinished to match.
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a morning or an afternoon. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, usually by the following day, the bath is ready to use.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Have a window or extractor fan available
- Keep a parking space free if you can
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Related advice
Keeping it looking good
After the repair has cured, a few habits help it last:
- Keep abrasive pads and gritty cleaners away from the bath
- Keep metal cans and razors off the surface
- Stick to mild cleaners and a soft cloth
- Fix dripping taps early to stop staining and limescale
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
About our accreditations · Every repair comes with a one-year guarantee.
