Lincolnshire · England
Bath chip & crack repair in Brattleby, Lincolnshire
Damaged bath in Brattleby? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- A chip where the taps sit
- A chipped rim or side
What we do, step by step
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and the work begins. You can expect it to take two to three hours for most chips, and we’ll tell you if anything changes.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
Before we arrive
- Let the surface dry out before the visit
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
How we handle bath repair in Brattleby
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We are frequently asked to fix chips under the taps and chips along the edge of the bath, in roll-top & freestanding, cast iron enamel and whirlpool & spa baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Brattleby (LN1)
- Area hub
- Lincolnshire
- Cover
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Brattleby
Prices start from £95. We charge the same across the UK, including Brattleby. What changes the price is:
- How many items we do on one visit
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- A wider photo showing the entire bath
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Repair or replace: which is better?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Prices start from £95. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why Brattleby clients choose us
- Everything repaired in place
- Same prices wherever you are
- Straight answers about what a repair can do
- We come to you, anywhere in the UK
Take a look at our full price list and resurfacing vs replacement cost guide.
Common problems we fix in Brattleby
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
It’s worth getting a quote if you see:
- A chip where the taps sit
- Scuffs and scratches in the surface
- Rust by the waste and overflow
- A kit repair that didn’t last
What to look for in a quote
- How to care for the finish
- How long the guarantee is and what it covers
- Whether a trained technician does the job
- When it can be used again
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Brattleby and nearby
Brattleby is about 6 miles north of Lincoln, in Lincolnshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Our repair technicians cover all 732 towns and villages across Lincolnshire, from the larger towns to small villages. We work right across the region, from Brattleby to Leeds (52 miles away).
Our technicians cover all of LN1 and the streets around it. If you are just outside Brattleby, we cover Aisthorpe (1 mile south), Scampton (1 mile south), Ingham (2 miles north), Fillingham (3 miles north) and Hackthorn (3 miles east). Further out, we also cover Lincoln (6 miles south), Gainsborough (10 miles north-west), North Hykeham (9 miles south), Birchwood (7 miles south), Hykeham (9 miles south) and Ermine (5 miles south).
Near you in Brattleby
Around Brattleby, we work in homes near Scampton Church of England Primary School and Church of St Cuthbert, among other places. The nearest railway station is Saxilby station, roughly 5 miles south-west of the centre.
Landlord and trade work in Brattleby
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Towns and villages near Brattleby
Also in Brattleby
Brattleby questions
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Is a repair better than a new one?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Is a cracked acrylic bath repairable?
Generally, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
What do you need from me?
Photos of the damage, a picture of the whole bath and your postcode. Then we will agree a date.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Will I be able to see the repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
What a repair cannot fix
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- Rust that has eaten right through a steel bath
- Water coming from the waste or taps rather than the bath
- Acrylic cracks with no access behind them
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
