Monmouthshire · Wales
Bath chip & crack repair in Brockweir, Monmouthshire
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Brockweir. Free, fixed quotes from your photos.
- Repairs from £95
- Holes from dropped items
- Chips along the edge of the bath
Bath repair in Brockweir without replacing anything
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the following day. Our technicians work on cast iron enamel, pressed steel enamel and roll-top & freestanding, and common reasons people contact us are holes from dropped items and a cracked acrylic bath.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we will come back.
- Where
- Brockweir (NP16)
- Region
- Monmouthshire
- Cover
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
Most damage we see is avoidable. A few tips:
- Have new chips seen to early
- Give the bath a quick rinse after use
- Cover the bath during DIY or decorating
- Store metal items away from the bath
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a few hours, depending on the damage. If anything looks different from your photos, we will talk to you before going ahead.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, normally by the following day, the bath is ready to use.
How to prepare
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Advice
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Brockweir: your questions answered
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Mention it when you send photos.
How long does the repair take to cure?
Usually the day after. We confirm the time before we leave.
Will I be able to see the repair?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Why repair rather than replace?
Swapping a damaged bath for a new one usually means a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. Repairing it deals only with the damage in a single visit. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- We’ll tell you if it’s not worth repairing
- No extra charge for your area
- CHAS, Constructionline and SafeContractor accredited
- Colour-matched on site
Read our full price list or guide to resurfacing and replacement costs.
Places near Brockweir
What else we do in Brockweir
Prices and what affects them
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- How much damage there is
- The material and finish
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
You can take the photos on your phone. Just make sure we can see:
- Any details about the material
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- One picture of the whole bath
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Brockweir and nearby
Brockweir is about 5 miles north of Chepstow, in Monmouthshire. Anywhere in NP16, we come to you. We work in 115 places in Monmouthshire, from the larger towns to small villages. Our jobs stretch from Brockweir to Birmingham (about 62 miles away).
Our repair technicians cover all of NP16 and the streets around it. Other places close to Brockweir include The Triangle (1 mile east), Tyndyrn (1 mile south-west), Hewelsfield Common (1 mile north-east), Coldharbour (2 miles north-east) and Llandogo (2 miles north). Further out, we also cover Chepstow (5 miles south), Monmouth (7 miles north), Cil-y-coed (9 miles south-west), Bulwark (6 miles south), Overmonnow (7 miles north) and Gwndy (11 miles south-west).
Local landmarks in Brockweir
Around Brockweir, we work in homes near Lippets Grove, The Brockweir Inn and Church of St Michael, among other places. The nearest railway station is Chepstow station, roughly 5 miles south. Further afield, we also cover the area around Chepstow Community Hospital (5 miles south) and St Briavels Castle (2.2 miles north-east). Open spaces near Brockweir include Beddick Hill and The Park & Poor's Allotment Nature Reserve.
When to call us in Brockweir
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
The things customers usually mention when they call are:
- Hairline or through cracks in acrylic
- A failed DIY repair that’s discoloured or lifting
- Damage done while the bathroom was being fitted
- Scratches you can feel with a fingernail
Comparing quotes
- What protection goes down before work starts
- How to care for the finish
- If travel is included in the price
- Is the price fixed, and does it include VAT?
For landlords and businesses
If you manage property in Brockweir, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
About our accreditations · Every repair comes with a one-year guarantee.
