Essex · England
Bath Repair for Brookstreet homes
Damaged bath in Brookstreet? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Cracks in an acrylic bath
- A chip where the taps sit
Why repair rather than replace?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- Normally one visit, start to finish
- Rooms protected and left tidy
- A fixed quote before you book
- One price list for the entire UK
Read our pricing or bath cost comparison.
Bath repair at your home in Brookstreet
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands with a one-year guarantee. If you are dealing with damage done while the bathroom was being fitted and cracks in an acrylic bath, we can usually put it right, on cast iron enamel, roll-top & freestanding and acrylic alike.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- Brookstreet (CM6)
- Region
- Essex
- Warranty
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which generally takes two to three hours for most chips. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the next day.
Before we arrive
- Let us know which floor the room is on
- Make sure the room can be ventilated
- Keep pets and children out of the room while we work
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Read more
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
When a repair is not the answer
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- Acrylic cracks with no access behind them
- Wear across the whole surface, which needs re-enamelling
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
Brookstreet: your questions answered
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
When can I have a bath again?
Typically the following day. We will tell you the exact curing time when we finish.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Which areas do you work in?
Across the UK. Our prices are the same everywhere.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, access to the room.
What does bath repair cost?
Prices start from £95. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your CM6 postcode.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Will I be able to see the repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
Prices and what affects them
Repairs from £95. Prices are worked out job by job, from your photos. What matters most is:
- Whether old repairs or coatings need taking off
- How much damage there is
- What the surface is made of
- Where the damage is and how we get to it
Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed price
Photographing the damage takes a minute, and it saves a visit. Please include:
- Daylight if possible, and no flash reflection
- The material, if you know it
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
Email us photos of the damage and one of the whole item, and tell us you’re in Brookstreet, and we’ll come back with a fixed quote.
Also near Brookstreet
Other services in Brookstreet
Looking after it afterwards
Nothing complicated is needed:
- Rinse it down after each bath
- Ensure an acrylic bath is firm underfoot
- Have new chips seen to early
- Do not scrub with anything abrasive
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
When to call us in Brookstreet
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
It’s worth getting a quote if you see:
- Chips along the edge of the bath
- Rust spots around the plughole
- Cracks in an acrylic bath
- A hole punched through by something heavy
What your quote should include
- Whether there are any call-out or travel charges
- A fixed price, and whether VAT is included
- Whether the colour is mixed to match
- How changes to the job are handled
About Brookstreet
Brookstreet is about 7 miles west of Braintree, in Essex. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. We work in 644 places across Essex. Our jobs stretch from Brookstreet to London (about 33 miles away).
All of CM6 is covered. If you are just outside Brookstreet, we cover Little Dunmow (1 mile east), Felsted (1 mile east), North End (1 mile south), Causeway End (2 miles south-east) and Watch House Green (2 miles east). Within a short drive, we also cover Chelmsford (9 miles south), Braintree (7 miles east), Harlow (14 miles south-west), Maldon (15 miles south-east), Witham (11 miles south-east) and Saffron Walden (13 miles north-west).
What’s near Brookstreet
Our customers here include homes close to Flitch Of Bacon Public House, The Flitch Green Academy and Church of St Mary the Virgin and the streets around them. Nearby you’ll also find Little Easton Moat (3.6 miles north-west) and Braintree Community Hospital (5.8 miles east). Not far away are Phyllis Currie Nature Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
