Norfolk · England
Bath Repair in Browick
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Browick. Free, fixed quotes from your pictures.
- Repairs from £95
- Hairline or through cracks in acrylic
- Chips caused by builders
When to call us in Browick
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.
The most common problems we are called about are:
- Hairline or through cracks in acrylic
- Chips on the rim or sides
- An old repair that has yellowed or come loose
- Scratches you can feel with a fingernail
What your quote should include
- How long it needs to cure
- How changes to the job are handled
- What protection goes down before work starts
- Who turns up on the day
Bath repair in Browick, done in place
Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. We regularly repair whirlpool & spa baths, roll-top & freestanding and acrylic, and the jobs we see most are a chip where the taps sit and snagging damage from a refit.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Browick (NR18)
- Area hub
- Norfolk
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Browick
Browick is about 1 mile east of Wymondham, in Norfolk. Our repair technicians come to homes and businesses in Browick and nearby villages, so there is no workshop to go to. Browick is one of 797 towns and villages in Norfolk where we work.
Every address in NR18 is within our area. Neighbouring places we cover include Downham (1 mile north), Wymondham (1 mile west), Silfield (1 mile south), Ketteringham (2 miles north-east) and Hethel (2 miles south-east). Larger places within reach include Norwich (8 miles north-east), Dereham (11 miles north-west), Sprowston (9 miles north-east), Thorpe St Andrew (9 miles north-east), Attleborough (7 miles south-west) and Watton (13 miles west).
Landmarks near Browick
Our clients here include homes close to Ashleigh Primary School and Nursery, Toll's Meadow and Wymondham High Academy. For rail, the closest station is Wymondham station, about 1.2 miles west of the centre. Well-known places in the area include Wymondham Heritage Museum (1.2 miles west) and Norfolk and Norwich University Hospital (4.5 miles north-east). For a walk, there is Hethel Old Thorn.
Places near Browick
More services for Browick
Questions from Browick
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before.
How long does the repair take to cure?
Most baths can be used the following day. We confirm the time before we leave.
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Do you work in Browick?
Yes. We work across the UK and come to Browick. Send pictures and we’ll quote, or call 0345 017 0787.
Work for landlords and builders
For anyone letting property in or around Browick, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
How it works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, depending on the damage, and we finish by cleaning up and talking you through the result.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
- Ensure the area is dry
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
How to care for the repair
Once the work has cured, treat it gently:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Store metal items away from the bath
- Fix dripping taps early to stop staining and limescale
- Have new chips seen to early
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Repairing versus replacing in Browick
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.
What you get with us
- Everything repaired in place
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
- Colour-matched on site
See our pricing and guide to resurfacing and replacement costs.
Honest limits
A repair is not right for every job, for example:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Acrylic cracks with no access behind them
- Flexing caused by a failed cradle or loose feet
Send us photos and we will tell you honestly before you book.
Materials we repair
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
