Worcestershire · England
Bath chip & crack repair in Bryan's Green, Worcestershire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Bryan's Green, with a one-year guarantee on every repair.
- Repairs from £95
- A chipped rim or side
- A kit repair that didn’t last
Covering Bryan's Green
Bryan's Green is about 4 miles north of Droitwich Spa, in Worcestershire. We travel to homes and businesses in Bryan's Green, so there’s no workshop to go to. We cover all 376 towns and villages across Worcestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 16 miles away.
Our visits in WR9 are booked in the same way as anywhere else. Close by, we cover Cutnall Green (1 mile west), Broad Alley (1 mile south), Broad Common (1 mile south-west), Elmley Lovett (1 mile north-west) and Elmbridge (1 mile east). Larger places within reach include Worcester (8 miles south), Redditch (10 miles east), Kidderminster (6 miles north-west), Bromsgrove (5 miles east), Great Malvern (15 miles south-west) and Droitwich Spa (4 miles south).
Landmarks near Bryan's Green
In Bryan's Green, that means homes near Church of St Mary, Cutnall Green CofE Primary School and Rajdoot pub. The closest station to Bryan's Green is Hartlebury station, about 2.6 miles north-west of the centre. Nearby you’ll also find Elmley Lovett (1.4 miles north-west) and Barnsley Hall Hospital (5.4 miles north-east). The countryside around Bryan's Green includes Christopher Cadbury Wetland Reserve.
Bath repair in Bryan's Green, done in place
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands. Common call-outs are for a cracked acrylic bath and chips caused by builders, across cast iron enamel, roll-top & freestanding and whirlpool & spa baths.
Big or small, you get the same one-year guarantee in Bryan's Green and across Worcestershire.
- Location
- Bryan's Green (WR9)
- Region
- Worcestershire
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- We leave the room as we found it
- Colour mixed on the day to match
- We will tell you if it’s not worth repairing
- No need to remove anything
Take a look at our full price list and resurfacing vs replacement cost guide.
Questions from Bryan's Green
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
When can I have a bath again?
Generally the day after. We confirm the time before we leave.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Something went through my bath. Can it be fixed?
In most cases. Send us a photo of the hole and one from under the bath if you can.
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Aftercare tips
Simple care helps the repair last. Our advice:
- Keep abrasive pads and gritty cleaners away from the bath
- Fix dripping taps early to stop staining and limescale
- Cover the bath during DIY or decorating
- Keep metal cans and razors off the surface
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
When a repair isn’t the answer
We won’t take on work that will not last, so these are the limits:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Water coming from the waste or taps rather than the bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
Also near Bryan's Green
Other services in Bryan's Green
For landlords and businesses
If you manage property in Bryan's Green, we’ll quote for several properties at once. Send pictures for each one and we will come back with a combined price.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Common problems we fix in Bryan's Green
Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water sits around them, and any chip there soon rusts.
These are the problems we’re asked about most:
- A cracked acrylic bath
- Impact holes in acrylic
- A kit repair that didn’t last
- Rust by the waste and overflow
Comparing quotes
- What happens if they find more damage
- What aftercare is recommended
- How the colour is matched
- A fixed price, and whether VAT is included
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What happens on the day
We begin by going over the job with you. Next, we cover and mask everything nearby and the work begins. It normally takes a morning or an afternoon, and we’ll keep you posted as we go.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Make sure the area is dry
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Read more
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
