Greater London · England
Bath Repair for Bulphan homes
Fixed-price bath repair in Bulphan and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Chips along the edge of the bath
- A cracked acrylic bath
How we handle bath repair in Bulphan
Most of our bath repairs take a few hours, and you can typically bathe again the following day. There is no need to book a plumber or tiler, because the bath doesn’t move. If you’re dealing with damage beneath the taps and a chipped rim or side, we can help, on roll-top & freestanding, whirlpool & spa baths and cast iron enamel alike.
The work is covered for a year after we finish. Just call us if there is a problem and we will sort it.
- Location
- Bulphan (RM14)
- Area hub
- Greater London
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
What you get with us
- Free fixed quotes from pictures
- Accredited with CHAS, Constructionline and SafeContractor
- Everything repaired in place
- One visit for most repairs
See our full price list or guide to resurfacing and replacement costs.
What we can’t put right
We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Rust that has eaten right through a steel bath
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath that moves underfoot, until its support is fixed
Send us photos and we’ll tell you honestly before booking.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Stick to mild cleaners and a soft cloth
- Do not leave razors or cans standing in the bath
- Get any new chip repaired before it rusts
- Rinse it down after each bath
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
For landlords and businesses
We work for landlords, letting agents and housing providers in Bulphan as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
How it works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to two to three hours for most chips, tidy-up included.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
- Let us know if it has been repaired before
Ask for a price
Most clients in Bulphan get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Advice
Common questions in Bulphan
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
How long does the repair take to cure?
Normally the day after. We confirm the time before we leave.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Do you cover Bulphan?
We do. Repair technicians travel to Bulphan from across the region, and the price is the same as everywhere else.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Materials and what they mean for the repair
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
When to call us in Bulphan
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Keep an eye out for these signs:
- Hairline or through cracks in acrylic
- A chipped rim or side
- A chip where the taps sit
- Damage done while the bathroom was being fitted
Before booking anyone
- How soon you can use it again
- What prep work is covered
- The length of the guarantee and what it covers
- Who turns up on the day
Nearby places to Bulphan
What else we do in Bulphan
Where we work around Bulphan
Bulphan is about 4 miles north-west of Stanford-le-Hope, in Greater London. Wherever you are in the RM14 postcode area, we come to you. Bulphan is one of 764 towns and villages in Greater London where we work. We work right across the region, from Bulphan to London (20 miles away).
Every address in RM14 is within our area. You will find streets such as Church Road, Stanley Road and Albert Road, and we cover them all. We also cover the places around Bulphan: West Horndon (2 miles north-west), East Horndon (2 miles north), Orsett (3 miles south), Baker Street (3 miles south) and Little Warley (3 miles north-west). Within a short drive, we also cover Plaistow (15 miles west), Romford (8 miles west), Woodford (15 miles west), Plumstead (13 miles west), Canning Town (15 miles west) and Barking (11 miles west).
What’s near Bulphan
Around Bulphan, we work in homes near Bulphan Church of England Academy and Church of St Mary and the streets around them. The closest station to Bulphan is West Horndon station, about 1.7 miles north-west of the centre. Nearby you’ll also find Orsett Hospital (2.7 miles south) and Ealing Broadway Centre (3.6 miles south-west). Not far away are Langdon Nature Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
