Lincolnshire · England
Bath Repair for Burgh on Bain homes
Bath repair in Burgh on Bain without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Repairs from £95
- Chips caused by builders
- Rust spots around the plughole
When to call us in Burgh on Bain
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Typical reasons for a call-out include:
- Rusty patches near the plughole
- Chips along the edge of the bath
- An old repair that has yellowed or come loose
- Chips under the taps
Comparing quotes
- Who turns up on the day
- If travel is included in the price
- What the guarantee covers, and for how long
- How long it needs to cure
Bath repair in Burgh on Bain without replacing anything
Whatever the damage, the aim is the same: a repair that’s smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Whether it’s rusty patches near the plughole and holes from dropped items, we can normally put it right, whatever the material.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Burgh on Bain (LN8)
- Region
- Lincolnshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Burgh on Bain
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
Can you repair a hole in a bath?
Typically. Send us a photo of the hole and one from under the bath if you can.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Will the repair show?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
How do I get a price for bath repair in Burgh on Bain?
Prices start from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item and your postcode.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Why repair rather than replace?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Repairs from £95, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Why Burgh on Bain clients choose us
- Rooms protected and left tidy
- One price list for the whole UK
- One-year guarantee on every repair
- CHAS and Constructionline accredited
Read our full price list and resurfacing vs replacement cost guide.
The process
You do not need to empty the room. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a morning or an afternoon, and you’re welcome to carry on with your day while we work.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can generally use the bath the day after.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
Get a quote
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
Prices and what affects them
Repairs from £95. You’ll know the full cost before booking. We look at:
- Doing more than one item at once
- The colour and finish to match
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
Our prices are the same across the UK, so there is no premium for Burgh on Bain. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from photos
Two or three clear pictures are typically enough. Try to include:
- Natural light rather than flash
- A picture taken from further back
- Your postcode, so we can check dates
- Details of any past repairs
Send us a photo of the damage and one of the entire item, with your LN8 postcode, and we will come back with a fixed quote.
What we cannot put right
Some jobs are not right for a repair, for example:
- Acrylic cracks with no access behind them
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
Burgh on Bain and nearby
Burgh on Bain is about 7 miles west of Louth, in Lincolnshire. Our technicians come to homes and businesses in Burgh on Bain, so there is no workshop to go to. We work in all 732 towns and villages in Lincolnshire, from the larger towns to small villages. Our jobs stretch from Burgh on Bain to Leeds (about 65 miles away).
Every address in LN8 is within our area, from the main roads to the quietest streets. Close by, we cover Girsby Vale (1 mile north), Donington on Bain (2 miles south), South Willingham (2 miles south-west), Ludford (2 miles north-west) and Hainton (2 miles west). Within a short drive, we also cover Louth (7 miles east), New Waltham (12 miles north), Horncastle (11 miles south), Humberston (14 miles north-east), Woodhall Spa (14 miles south) and Market Rasen (7 miles west).
Near you in Burgh on Bain
Locally, our jobs take us to homes close to Church of St Helen. Nearby you’ll also find Benniworth Castle (3 miles south).
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Rinse the bath after use, especially in hard water areas
- Have new chips seen to early
- Protect the bath with a towel when doing jobs nearby
- Ensure an acrylic bath is firm underfoot
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Take it off before we arrive.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Landlords, agents and businesses in Burgh on Bain
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Towns and villages near Burgh on Bain
Also in Burgh on Bain
About our accreditations · Every repair comes with a one-year guarantee.
