South Lanarkshire · Scotland
Bath Repair for Burnside homes
Bath repair for Burnside, without a refit. Get a fixed quote from your pictures, then we come to you.
- Repairs from £95
- Rust spots around the plughole
- Scratches you can feel with a fingernail
Should you replace it?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Our bath repair starts from £95. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- One price list for the whole UK
- A year’s guarantee on all work
- We come to you, anywhere in the UK
- Colour-matched on site
See our pricing or guide to resurfacing and replacement costs.
Bath repair in Burnside without replacing anything
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath. Most baths can be used again the next day. We work on pressed steel enamel, acrylic and roll-top & freestanding, and people most frequently call us about damage done while the bathroom was being fitted and scratches you can feel with a fingernail.
A one-year guarantee comes as standard.
- Where
- Burnside (G73)
- Area hub
- South Lanarkshire
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Honest limits
It helps to know what we can’t do:
- Flexing caused by a failed cradle or loose feet
- Wear across the entire surface, which needs re-enamelling
- Acrylic cracks with no access behind them
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Burnside
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
Nearby places to Burnside
More services for Burnside
Where we work around Burnside
Burnside is about 2 miles west of Cambuslang, in South Lanarkshire. Wherever you are in the G73 postcode area, we come to you. Burnside is one of 139 places in South Lanarkshire where we work.
Jobs in G73 are booked in the same way as anywhere else. Whether you live on Snaefell Avenue, Burnside Road and Lower Bourtree Drive or a nearby road, a technician can come to you. Main roads around Burnside include the A749, so getting to you is simple. Nearby, we also work in Springhall (1 mile south-east), Cathkin (1 mile south), Eastfield (1 mile north), Whitlawburn (1 mile south-east) and Kirkhill (1 mile east). Larger places within reach include East Kilbride (4 miles south), Hamilton (6 miles south-east), Uddingston (5 miles east), Blantyre (4 miles east), Larkhall (10 miles south-east) and Carluke (15 miles east).
What’s near Burnside
Our customers here include homes close to West Coats Primary School, Fernhill School and Stonelaw Parish Church and the streets around them. Burnside has its own railway station: Burnside station. A little further out are Scottish Football Museum (2.2 miles north-west) and Rutherglen Castle (1.2 miles north-west). The countryside around Burnside includes Cathkin Braes and Hogganfield Loch.
Landlords, agents and businesses in Burnside
We carry out planned and one-off repairs for housing associations and facilities teams in South Lanarkshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What happens on the day
Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for two to three hours for most chips. Before leaving, we tell you when it can be used and how to care for it.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, usually by the following day, the bath is ready to use.
Before we arrive
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
- Let us know about parking or access
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and no obligation.
Related advice
FAQs for Burnside
Is there any odour?
There may be a mild smell during the work.
Can you repair a hole in a bath?
In most cases. Send us a picture of the hole and one from under the bath if you can.
What areas do you cover?
We cover the entire UK, including Burnside and the rest of South Lanarkshire. Send your postcode with your photos and we’ll confirm dates.
What do you need from me?
Just photos, your postcode and a contact number. On the day, access to the room.
What does bath repair cost?
Prices start from £95. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before and we will plan for it.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Keep abrasive pads and gritty cleaners away from the bath
- Cover the bath during DIY or decorating
- Don’t leave razors or cans standing in the bath
- Don’t leave a fresh chip for long
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
What bath repair costs
Repairs from £95. Prices are worked out job by job, from your pictures. The main factors are:
- Whether we combine several jobs
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- The material
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- A picture taken from further back
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- Details of any past repairs
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Do you need bath repair in Burnside?
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex.
If you can see any of these, send us a photo:
- Rust spots around the plughole
- A chip where the taps sit
- Chips along the edge of the bath
- Holes from dropped items
What your quote should include
- Who will actually do the work
- What prep work is covered
- What the guarantee covers, and for how long
- Whether there are any call-out or travel charges
About our accreditations · Every repair comes with a one-year guarantee.
