East Sussex · England
Bath chip & crack repair in Burwash Weald, East Sussex
Bath repair in and around Burwash Weald: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Rusty patches near the plughole
- Damage beneath the taps
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Don’t scrub with anything abrasive
- Make sure an acrylic bath is firm underfoot
- Get a dripping tap fixed promptly
- Have new chips seen to early
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
How we handle bath repair in Burwash Weald
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Typical jobs include scratches you can feel with a fingernail and damage beneath the taps, across acrylic, whirlpool & spa baths and pressed steel enamel.
You get a one-year guarantee, the same in Burwash Weald as everywhere else we work.
- Location
- Burwash Weald (TN19)
- Area hub
- East Sussex
- Cover
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Prices start from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- Straight answers about what a repair can do
- Most jobs done in one visit
- Dust sheets down, tidy finish
- Fixed prices from your photos
Read our prices page or bath cost comparison.
Covering Burwash Weald
Burwash Weald is about 9 miles south-east of Crowborough, in East Sussex. Our repair technicians come to clients in Burwash Weald and the surrounding area, so nothing has to leave your home. We work in all 289 towns and villages across East Sussex, from the larger towns to small villages. Our nearest city page is London, about 40 miles away.
Here we cover the TN19 postcode area. Burwash Weald sits on or near the A265, so getting to you is simple. Other places close to Burwash Weald include Burwash Common (1 mile west), Burwash (2 miles north-east), Wood's Corner (3 miles south), Punnett's Town (3 miles south-west) and Dallington (3 miles south). We also work in nearby towns such as Eastbourne (14 miles south), Hastings (12 miles south-east), Bexhill-on-Sea (11 miles south-east), Hailsham (10 miles south-west), Crowborough (9 miles north-west) and St Leonards (12 miles south-east).
What’s near Burwash Weald
Locally, our jobs take us to homes close to The Wheel Inn and St Philip's Church and the streets around them. Burwash Weald’s nearest station is Stonegate station, about 2.2 miles north. Further afield, we also cover the area around Ticehurst House Hospital (4.5 miles north) and Old Castle (2.8 miles south).
What a repair can’t fix
We will always be straight with you, so here’s what a repair can’t fix:
- Wear across the whole surface, which needs re-enamelling
- A steel bath rusted through
- Acrylic cracks with no access behind them
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
Questions from Burwash Weald
How invisible is a bath repair?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
How much does bath repair cost in Burwash Weald?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is a cracked acrylic bath repairable?
Often, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Places near Burwash Weald
Also in Burwash Weald
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
What we do, step by step
Your technician turns up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take two to three hours for most chips, and we leave the room as we found it.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the next day.
Preparing for the visit
- Let the surface dry out before the visit
- Point us to the nearest place to park
- Plan for the room to be out of bounds to pets and children
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Related advice
Common problems we fix in Burwash Weald
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Signs it’s time to call us include:
- Hairline or through cracks in acrylic
- Damage done while the bathroom was being fitted
- Scratches you can feel with a fingernail
- A chipped rim or side
What to look for in a quote
- How long it needs to cure
- How the room is protected while they work
- How long the guarantee is and what it covers
- What happens if the damage is worse than the photos show
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
