Ceredigion · Wales
Bath Repair in Caemorgan
Problem with your bath in Caemorgan? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- A chip where the taps sit
- Chips on the rim or sides
About our bath repair in Caemorgan
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. We regularly repair whirlpool & spa baths, pressed steel enamel and acrylic, and the jobs we see most are damage beneath the taps and holes from dropped items.
You get a one-year guarantee, the same in Caemorgan as everywhere else we work.
- Location
- Caemorgan (SA43)
- Region
- Ceredigion
- Warranty
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Caemorgan questions
How invisible is a bath repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Can you redo an old repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Is a cracked acrylic bath repairable?
Usually, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Signs you need bath repair in Caemorgan
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
The most common problems we’re called about are:
- Chips caused by builders
- Rust by the waste and overflow
- Hairline or through cracks in acrylic
- Deep scratches in acrylic
Before you book anyone
- How your room will be protected
- Whether the price covers travel
- Whether a trained technician does the job
- What the guarantee covers, and for how long
Places near Caemorgan
Also in Caemorgan
Our work in Caemorgan
Caemorgan is about 21 miles north-west of Carmarthen, in Ceredigion. Anywhere in SA43, a technician comes to you. We cover 125 places across Ceredigion.
Every address in SA43 is covered. Jobs here include addresses on New Mill Road, Aberystwyth Road and Y-Rhos and the roads around them. Neighbouring places we cover include Aberteifi (1 mile south-west), Bridgend (1 mile south-west), Noyadd Wilym (1 mile south-east), Pentre-Langwm (2 miles west) and Llandudoch (2 miles west).
Near you in Caemorgan
Typical jobs here are in homes near Ysgol Gynradd Aberteifi, Church Of St Cynllo and The Lamb Inn and the streets around them. Nearby you will also find Cardigan and District Community Hospital (0.8 miles south-west) and Cardigan Castle (1.1 miles south-west). Not far away are Banc y Warren and Teifi Marshes Nature Reserve.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
How we price bath repair
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- Where the damage is and how we get to it
- The colour and finish to match
- Any earlier repairs that need removing first
- The type of damage
The price reflects the work involved, not your postcode. You’ll see the full price before booking, with no extras added later.
Getting a price from photos
A couple of clear pictures is all it takes. It helps if you send:
- A coin beside the damage so we can judge size
- Where you are, by postcode
- Whether it’s been repaired or coated before
- A wider photo showing the whole bath
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
How to look after the repair
Nothing complicated is needed:
- Cover the bath during DIY or decorating
- A dripping tap stains enamel, so fix it early
- Have new chips seen to early
- Clean with warm water and a mild detergent
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair cannot fix:
- Flexing caused by a failed cradle or loose feet
- Acrylic cracks with no access behind them
- Leaking fittings, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
How it works
You don’t need to empty the room beforehand. We bring everything we need with us, put protection down and start once you’re happy with the plan. Most jobs take a few hours, and you’re welcome to carry on with your day while we work.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, normally by the day after, the bath is ready to use.
How to prepare
- Move bottles, mats and clutter away from the area
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
How to get a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Advice
Should you replace it?
Many people think a damaged bath means a new one. In most cases it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why Caemorgan customers choose us
- No need to remove anything
- A fixed quote before you book
- Colour-matched on site
- We come to you, anywhere in the UK
See our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
