Cornwall · England
Bath Repair for Canon's Town homes
Bath repair for Canon's Town, without a refit. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- A kit repair that didn’t last
- A chipped rim or side
Bath repair at your home in Canon's Town
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, generally in a single visit. We work on acrylic, roll-top & freestanding and cast iron enamel, and people most frequently call us about holes from dropped items and deep scratches in acrylic.
You get a one-year guarantee, the same in Canon's Town as everywhere else we work.
- Location
- Canon's Town (TR27)
- County
- Cornwall
- Warranty
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Canon's Town
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
You may need us if you’ve spotted:
- Snagging damage from a refit
- Rusty patches near the plughole
- An old repair that has yellowed or come loose
- Cracks in an acrylic bath
What to look for in a quote
- Whether the price covers travel
- Whether the colour is mixed to match
- The length of the guarantee and what it covers
- Who turns up on the day
Canon's Town and nearby
Canon's Town is about 5 miles north-east of Penzance, in Cornwall. Across the TR27 area, we carry out the work at your property. Our repair technicians cover all 644 towns and villages across Cornwall, from the larger towns to small villages.
Jobs in TR27 work the same way as everywhere else we cover. Jobs here include addresses on Back Lane, Heather Lane and Arch Lane and the roads around them. Nearby, we also work in Rose-an-Grouse (1 mile north-east), Whitecross (1 mile south-west), Cockwells (1 mile south-west), St Erth (1 mile east) and Lelant (1 mile north-east). Further out, we also cover Camborne (8 miles north-east), Redruth (11 miles north-east), Penzance (5 miles south-west), Helston (9 miles south-east), Hayle (3 miles north-east) and St Ives (3 miles north).
Around Canon's Town
We visit homes around Church of Saint Erth, Hayle Academy and The Watermill pub, among other places. The closest station to Canon's Town is St Erth station, roughly 0.6 miles north-east. Nearby you will also find St Michael's Mount Castle (3.6 miles south) and St Michael's Hospital (1.7 miles north-east). For a walk, there’s Trink Hill and Marazion Marsh RSPB Reserve.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
For landlords and businesses
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Housing associations and facilities teams use us for planned and reactive repairs in Cornwall and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Nearby places to Canon's Town
What else we do in Canon's Town
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Get a dripping tap fixed promptly
- Put a towel in the bath if you’re working above it
- Clean with warm water and a mild detergent
- Have new chips seen to early
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Your questions about bath repair in Canon's Town
Can you price it without visiting?
Nearly always. If pictures don’t show enough, we’ll ask for another angle.
What about rust by the waste?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before and we’ll plan for it.
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
What happens once I’ve sent pictures?
You’ll get a fixed quote back, plus dates. You are under no obligation.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
What we do, step by step
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes two to three hours for most chips, and we finish with a tidy-up and a look at the finished work together.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the following day.
How to prepare
- Clear the area around the damage
- Ensure the room can be ventilated
- Ensure the area is dry
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and no obligation.
Advice
Prices and what affects them
Prices start from £95. We price every job individually. The main factors are:
- How many areas need work
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
- The material
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
Getting a price from photos
Good pictures mean an accurate price. Here’s what helps:
- The material, if you know it
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
Most clients in Canon's Town get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Repair or replace: which is better?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
What you get with us
- We leave the room as we found it
- Work done at your home or business
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
Take a look at our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
