Suffolk · England

Bath chip & crack repair in Carlton, Suffolk

Problem with your bath in Carlton? We repair it in place, mix the colour on the day and guarantee the work for a year.

  • Repairs from £95
  • Snagging damage from a refit
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Carlton

Bath repair in Carlton without replacing anything

Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. We regularly repair roll-top & freestanding, whirlpool & spa baths and cast iron enamel, and common reasons people get in touch are rust spots around the plughole and scratches you can feel with a fingernail.

A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Location
Carlton (IP17)
Area hub
Suffolk
Guarantee
A year, on every repair
Price
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Repairs by material

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.

Aftercare tips

It’s all simple stuff, just a few sensible habits:

  • Have new chips seen to early
  • Do not leave razors or cans standing in the bath
  • Rinse it down after each bath
  • Protect the bath with a towel when doing jobs nearby

Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.

Do you need bath repair in Carlton?

The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.

Typical reasons for a call-out include:

  • Snagging damage from a refit
  • Cracks in an acrylic bath
  • Rusty patches near the plughole
  • A chip where the taps sit

Comparing quotes

  • How to care for the finish
  • Whether cleaning and preparation are in the price
  • How the room is protected while they work
  • Whether the colour is mixed to match

10 questions to ask before booking

Why repair rather than replace?

Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Our bath repair starts from £95. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why choose Surface Doctor in Carlton

  • Colour-matched on site
  • We’ll tell you if it’s not worth repairing
  • Usually one visit, start to finish
  • Free fixed quotes from pictures

Take a look at our pricing and guide to resurfacing and replacement costs.

FAQs for Carlton

Do I need to be at home?

Yes. We need access to the room while we work, at a time we agree with you.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

What does bath repair cost?

Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Is a cracked acrylic bath repairable?

Generally, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.

Is it OK to have pets in the house?

Just keep them out of the work area. We will tell you when the room can be used again.

Is a bath repair durable?

It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.

Work for landlords and builders

We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

When a repair isn’t the answer

To be straight with you, there are a few things a repair will not fix:

  • Acrylic cracks with no access behind them
  • Flexing caused by a failed cradle or loose feet
  • A bath worn all over, where resurfacing makes more sense

If in doubt, send pictures and we’ll say what we think before booking.

Surfaces we repair

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel

The process

We turn up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, depending on the damage, and we leave the room as we found it.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the next day.

Getting ready for the visit

  • Mention any earlier repairs or resurfacing
  • Plan for the room to be out of bounds to pets and children
  • Move bottles, mats and clutter away from the area

Getting a price

The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.

Get a free quote

Read more

Our work in Carlton

Carlton is about 15 miles north-east of Kesgrave, in Suffolk. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Carlton is one of 731 towns and villages in Suffolk where we work.

Jobs in IP17 work the same way as everywhere else we cover. Whether you live on Pear Tree Close, Carlton Road and Rosemary Lane or anywhere nearby, a technician can come to you. Nearby, we also work in Kelsale (1 mile north-east), Dorley's Corner (1 mile north), Saxmundham (1 mile south), Benhall (2 miles south) and Sweffling (2 miles west). Within a short drive, we also cover Kesgrave (15 miles south-west), Woodbridge (12 miles south-west), Halesworth (8 miles north), Leiston (4 miles east), Framlingham (6 miles west) and Aldeburgh (7 miles south-east).

Around Carlton

Around Carlton, we work in homes near The Poachers Pocket pub, Church of St Peter and Saxmundham Free School, among other places. You will also find Saxmundham Free School (1 mile south) and Saxmundham Primary School (0.6 miles south). Carlton’s nearest station is Saxmundham station, roughly 0.9 miles south of the centre. Nearby you’ll also find Saxmundham Museum (0.9 miles south) and Blyth Rural District (0.5 miles south). Green spaces nearby include Darsham Marshes.

Map of Carlton © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.