Carmarthenshire · Wales
Bath chip & crack repair in Carmarthenshire
Bath repair in Carmarthenshire without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Repairs from £95
- Scratches you can feel with a fingernail
- Chips along the edge of the bath
Keeping it looking good
Looking after the surface is easy:
- A dripping tap stains enamel, so fix it early
- Cover the bath during DIY or decorating
- Keep metal cans and razors off the surface
- Clean with warm water and a mild detergent
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.
Bath repair at your home in Carmarthenshire
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, typically in a single visit. Our technicians work on whirlpool & spa baths, roll-top & freestanding and pressed steel enamel, and people most frequently call us about a kit repair that didn’t last and damage beneath the taps.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Carmarthenshire (SA33)
- Region
- Carmarthenshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we are called out for in Carmarthenshire
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
Common reasons people in Carmarthenshire contact us include:
- An old repair that has yellowed or come loose
- Impact holes in acrylic
- Snagging damage from a refit
- Damage beneath the taps
Questions to ask before booking
- How the colour is matched
- Is the price fixed, and does it include VAT?
- How long it needs to cure
- How your room will be protected
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Places near Carmarthenshire
What else we do in Carmarthenshire
Prices and what affects them
Repairs from £95. There is no area surcharge for Carmarthenshire. The price reflects:
- How much damage there is
- What the surface is made of
- How hard the colour is to match
- Previous DIY repairs that have to come out
We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
We price nearly every job from pictures. This is what we need:
- One sharp close-up of the damage
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- Natural light rather than flash
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
Carmarthenshire and the surrounding area
Carmarthenshire (Welsh: Sir Gaerfyrddin) is about 8 miles west of Carmarthen, in Carmarthenshire. Our repair technicians come to homes and businesses in Carmarthenshire, so there’s no workshop to go to. We cover 195 places in Carmarthenshire, from the larger towns to small villages.
Jobs in SA33 work the same way as everywhere else we cover. From Meidrim Road and Salem Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Meidrim (1 mile north), Sanclêr (2 miles south), St Clears (2 miles south), Pwll-trap (2 miles south-west) and Llangynin (2 miles west). We also work in nearby towns such as Carmarthen (8 miles east), Burry Port (15 miles south-east), Pembrey and Burry Port Town (15 miles south-east), Achddu (15 miles south-east), Cwmoernant (8 miles east) and Furnace (15 miles south-east).
Local landmarks in Carmarthenshire
Our clients here include homes close to The Fountain Inn and St David's Church, among other places. Nearby you will also find Llanddowror Motte (3.6 miles south-west). Green spaces nearby include Pen Treasgell-fawr and Cors Goch National Nature Reserve.
Carmarthenshire questions
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Is a cracked acrylic bath repairable?
Generally, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Something went through my bath. Can it be fixed?
Frequently, if there is access underneath. The hole is backed, filled and refinished to match.
Which areas do you work in?
Everywhere in the UK, Carmarthenshire included. There’s no extra charge for travel.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
When a repair is not the answer
In fairness, there are a few things a repair won’t fix:
- Wear across the entire surface, which needs re-enamelling
- Acrylic cracks with no access behind them
- Leaking fittings, which need a plumber
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Carmarthenshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
The process
Visits start with a quick look at the job together, so you know exactly what we’re doing. After that, protection goes down around the work area and we start. You can expect it to take a few hours, depending on the damage, and we will tell you if anything changes.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Open a window if you can
- Keep pets and children out of the room while we work
Get a quote
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
