Kent · England
Bath Repair in Chalk
Bath repair in and around Chalk: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Rust spots around the plughole
- Deep scratches in acrylic
How we handle bath repair in Chalk
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. Our technicians work on whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and the jobs we see most are damage done while the bathroom was being fitted and rusty patches near the plughole.
A one-year guarantee comes as standard.
- Area
- Chalk (DA12)
- Area hub
- Kent
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Chalk questions
How invisible is a bath repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
How long does the repair take to cure?
Most baths can be used the following day. We will tell you the exact curing time when we finish.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
More services for Chalk
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.
Signs you need bath repair in Chalk
A cracked acrylic bath normally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move.
Most people contact us after spotting one of these:
- Damage beneath the taps
- Cracks in an acrylic bath
- Damage done while the bathroom was being fitted
- Rust by the waste and overflow
What your quote should include
- The length of the guarantee and what it covers
- How to care for the finish
- What happens if they find more damage
- Whether the price is fixed and includes VAT
Repair or replace in Chalk?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why choose Surface Doctor in Chalk
- Technicians who travel to you, UK-wide
- We leave the room as we found it
- We’ll tell you if it’s not worth repairing
- Accredited with CHAS, Constructionline and SafeContractor
See our pricing or resurfacing vs replacement cost guide.
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Aftercare tips
It’s all simple stuff:
- Rinse the bath after use, especially in hard water areas
- Get any new chip repaired before it rusts
- Do not scrub with anything abrasive
- Clean with warm water and a mild detergent
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams and rinse after use.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
Our work in Chalk
Chalk is about 1 mile east of Gravesend, in Kent. We visit customers in Chalk and nearby villages, so nothing has to leave your home. We cover all 922 towns and villages across Kent, from the larger towns to small villages. You can also see our page for London, about 22 miles away.
We cover every part of DA12 and the streets around it. Streets in the area include Chalk Road, Castle Lane and Orlick Road, and we cover them all. Nearby, we also work in Upper Ifield (1 mile south), Thong (1 mile south), Shorne (1 mile south-east), Shorne Ridgeway (2 miles south-east) and Higham (2 miles south-east). Further out, we also cover Maidstone (12 miles south-east), Sittingbourne (15 miles south-east), Dartford (8 miles west), Sevenoaks (14 miles south-west), Northfleet (3 miles west) and Swanley (10 miles west).
What’s near Chalk
Locally, our jobs take us to homes close to Church of St Mary, St John's Catholic Comprehensive and Westcourt Primary School. You’ll also find Thamesview School (0.7 miles south-west) and Shorne Woods Country Park (1.9 miles south). The nearest railway station is Gravesend station, roughly 2 miles west. Nearby you’ll also find Rochester Castle (4.8 miles south-east) and Gravesham Museum (1.9 miles north-west). Green spaces nearby include Gad's Hill and Rede Common.
The process
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes a few hours for most jobs. The room is left tidy and ready to use once it has cured.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can normally use the bath the day after.
How to prepare
- Let us know about parking or access
- Let us know if it has been repaired before
- Clear toiletries, mats and anything else from around the area
Ask for a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you’re under no obligation.
Read more
How we price bath repair
Repairs from £95. We price every job individually. The main factors are:
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
- What kind of damage it is
- The material
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A picture taken from further back
- What it’s made of, if you know
- Natural light rather than flash
- A coin or ruler next to the damage for scale
If you’re in Chalk and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
When we would advise against a repair
It helps to know what we can’t do too:
- Wear across the whole surface, which needs re-enamelling
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
If in doubt, send photos and we will say what we think.
Materials we repair
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
