Cheshire East · England
Bath chip & crack repair in Checkley, Cheshire East
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Checkley. Free, fixed quotes from your photos.
- Repairs from £95
- A cracked acrylic bath
- Holes from dropped items
How we handle bath repair in Checkley
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. We regularly repair roll-top & freestanding, whirlpool & spa baths and pressed steel enamel, and people most frequently call us about chips along the edge of the bath and rusty patches near the plughole.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back.
- Area
- Checkley (CW3, CW5)
- County
- Cheshire East
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Honest limits
We will always be straight with you, so here’s what a repair will not do:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
- Acrylic cracks with no access behind them
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
Signs you need bath repair in Checkley
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
Signs it’s time to call us include:
- A chip where the taps sit
- Holes from dropped items
- Chips caused by builders
- A chipped rim or side
What to look for in a quote
- Whether the price is fixed and includes VAT
- Who turns up on the day
- What happens if the damage is worse than the photos show
- Whether there are any call-out or travel charges
Covering Checkley
Checkley is about 6 miles south of Crewe, in Cheshire East. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Checkley is one of 254 towns and villages in Cheshire East we cover. Our jobs stretch from Checkley to Manchester (about 33 miles away).
All of CW3 and CW5 is within our area. We also cover the places around Checkley: Wrinehill (1 mile east), Ravenshall (1 mile north-east), Betley (2 miles north-east), Bowsey Wood (2 miles east) and Madeley (2 miles east). We also work in nearby towns such as Crewe (6 miles north), Congleton (13 miles north-east), Nantwich (6 miles north-west), Middlewich (12 miles north), Sandbach (9 miles north) and Coppenhall (7 miles north).
Near you in Checkley
Around Checkley, we work in homes near Madeley High School and the streets around them. Further afield, we also cover the area around Englesea Brook Chapel and Museum of Primitive Methodism (3.3 miles north) and Checkley cum Wrinehill (0.5 miles north-east). Not far away are Black Firs and Cranberry Bog.
Places near Checkley
What else we do in Checkley
Questions from Checkley
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Can you quote from pictures?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Do you come to Checkley?
We do. We send a technician to Checkley for every job, and the price is the same as everywhere else.
Can you repair a hole in a bath?
Usually, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Will the price change on the day?
Your quote covers the damage in the photos. If there’s more, we will tell you before starting.
Repairing versus replacing in Checkley
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Our bath repair starts from £95. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Checkley
- Colour mixed on the day to match
- Generally one visit, start to finish
- We leave the room as we found it
- CHAS and Constructionline accredited
See our pricing and resurfacing vs replacement cost guide.
Landlord and trade work in Checkley
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Looking after it afterwards
To keep it looking its best for years:
- Keep abrasive pads and gritty cleaners away from the bath
- Don’t leave razors or cans standing in the bath
- Do not leave a fresh chip for long
- Clean with warm water and a mild detergent
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
What happens on the day
We turn up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a few hours, and the room is left clean and tidy.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can normally use the bath the next day.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Keep a parking space free if you can
- Keep children and pets away from the room on the day
How to get a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
