Suffolk · England
Bath Repair in Chelsworth
Fixed-price bath repair in Chelsworth and the surrounding area, generally in one visit and guaranteed for a year.
- Repairs from £95
- Impact holes in acrylic
- Chips along the edge of the bath
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Bath repair in Chelsworth without replacing anything
Whatever the damage, the aim is the same: a repair that’s smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. Common call-outs are for chips along the edge of the bath and damage done while the bathroom was being fitted, in whirlpool & spa baths, acrylic and cast iron enamel.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Chelsworth (IP7)
- Region
- Suffolk
- Cover
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When we’d advise against a repair
Some jobs are not right for a repair, including:
- Rust that has eaten right through a steel bath
- Cracks in acrylic we cannot reach from underneath
- Water coming from the waste or taps rather than the bath
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
Nearby places to Chelsworth
Also in Chelsworth
Looking after it afterwards
Looking after the surface is easy:
- Keep abrasive pads and gritty cleaners away from the bath
- Put a towel in the bath if you’re working above it
- Give the bath a quick rinse after use
- Keep metal cans and razors off the surface
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Why repair rather than replace?
Replacing a fitted bath normally involves a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. A repair deals only with the damage in one visit. Our bath repair starts from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- We come to you, anywhere in the UK
- One-year guarantee on every repair
- Nothing taken out or refitted
- Dust sheets down, tidy finish
Read our full price list and bath cost comparison.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
What bath repair costs
Prices start from £95. Prices are worked out job by job. What matters most is:
- How many areas need work
- What the surface is made of
- Any earlier repairs that need removing first
- How hard the colour is to match
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- What it’s made of, if you know
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Chelsworth: your questions answered
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
Something went through my bath. Can it be fixed?
Frequently, if there is access underneath. The hole is backed, filled and refinished to match.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can I get a quote without a visit?
Nearly always. If pictures don’t show enough, we will ask for another angle.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Can you redo an old repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
Where we work around Chelsworth
Chelsworth is about 8 miles north-east of Sudbury, in Suffolk. Across the IP7 area, a technician comes to you. Chelsworth is one of 731 places in Suffolk we cover. We work right across the region, from Chelsworth to London (about 59 miles away).
Jobs in IP7 are booked in the same way as anywhere else. That includes homes on The Street, Hall Road and Bildeston Road and the roads around them. Nearby, we also work in Monks Eleigh (1 mile west), Swingleton Green (1 mile west), Milden (2 miles south-west), Lindsey (2 miles south) and Brent Eleigh (2 miles west). We also work in nearby towns such as Ipswich (11 miles east), Bury St Edmunds (13 miles north-west), Sudbury (8 miles south-west), Stowmarket (8 miles north-east), Kesgrave (15 miles east) and Hadleigh (4 miles south-east).
Local landmarks in Chelsworth
Our customers here include homes close to Paddock Hall pub, Bildeston Primary School and Church of All Saints. Other landmarks nearby include Milden Castle (2.4 miles south-west). Open spaces near Chelsworth include Groton Wood.
What happens on the day
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Allow two to three hours for most chips. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
Get a quote
The quickest way to a price is to send two or three photos through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Read more
Common problems we fix in Chelsworth
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Contact us if you’ve noticed any of these:
- Chips on the rim or sides
- Chips under the taps
- Impact holes in acrylic
- Rust spots around the plughole
Comparing quotes
- The length of the guarantee and what it covers
- When it can be used again
- How the room is protected while they work
- How changes to the job are handled
About our accreditations · Every repair comes with a one-year guarantee.
