County Durham · England
Bath Repair in Chilton Lane
Fixed-price bath repair in Chilton Lane and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Holes from dropped items
- A cracked acrylic bath
What we do, step by step
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We clean up when we are done and let you know when you can use it again.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Avoid using the area for a few hours before we arrive
- Let us know about parking or access
- Move bottles, mats and clutter away from the area
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Related advice
Bath repair in Chilton Lane without replacing anything
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Typical jobs include cracks in an acrylic bath and rust by the waste and overflow, on acrylic, roll-top & freestanding and whirlpool & spa baths.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Location
- Chilton Lane (DL17)
- Area hub
- County Durham
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Chilton Lane
Other services in Chilton Lane
How we price bath repair
Prices start from £95. We price every job individually. What matters most is:
- Access to the area
- The colour and finish to match
- What kind of damage it is
- The material
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Send pictures for a quote
Phone photos are fine. Just make sure we can see:
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- A wider photo showing the whole bath
Upload photos of the damage and one of the entire item, with your DL17 postcode, and we’ll come back with a fixed quote.
Covering Chilton Lane
Chilton Lane is about 1 mile south-east of Ferryhill, in County Durham. Across the DL17 area, we come to you. We cover 329 places across County Durham. Our nearest city page is Newcastle upon Tyne, about 22 miles away.
We work across DL17 and the streets around it. We regularly work on streets such as Gipsy Lane, Lilac Road and Laurel Road and the roads around them. If you’re just outside Chilton Lane, we cover Ferryhill Station (1 mile north), Great Chilton (1 mile south-west), Mainsforth (1 mile north-east), Ferryhill (1 mile north-west) and Chilton (1 mile south-west). Larger places within reach include Durham (8 miles north), Newton Aycliffe (4 miles south-west), Bishop Auckland (6 miles west), Spennymoor (4 miles north-west), Seaham (13 miles north-east) and Chester-le-Street (13 miles north).
Near you in Chilton Lane
Around Chilton Lane, we work in homes near Ferryhill Station Primary School, Ferryhill Business and Enterprise College and The Surtees Arms and the streets around them. For rail, the closest station is Newton Aycliffe station, about 4.8 miles south-west. Well-known places in the area include Aycliffe and District Bus Preservation Society (3.3 miles south-west).
What we cannot put right
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
- Cracks in acrylic we cannot reach from underneath
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
Repairing versus replacing in Chilton Lane
A new bath brings a chain of other jobs: tiles along the rim normally crack when it comes out, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Our bath repair starts from £95. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Why us?
- We’ll tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
- No extra charge for your area
Read our full price list or bath cost comparison.
Looking after it afterwards
So the finish stays in good condition:
- Do not leave a fresh chip for long
- Put a towel in the bath if you are working above it
- Keep metal cans and razors off the surface
- Avoid scourers, wire wool and gritty cream cleaners
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Different materials, different repairs
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Chilton Lane: your questions answered
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Is a holed acrylic bath repairable?
Often, if there is access underneath. The hole is backed, filled and refinished to match.
Which areas do you work in?
All of County Durham, and the rest of the UK. Travel is included in the price.
Can a cracked acrylic bath be fixed?
Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Can rust on a bath be repaired?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
How do I get a price for bath repair in Chilton Lane?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
