Gloucestershire · England
Bath Repair for Chipping Campden homes
Our repair technicians come to Chipping Campden for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Scuffs and scratches in the surface
- Chips on the rim or sides
What we’re called out for in Chipping Campden
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
You may need us if you’ve spotted any of these:
- Damage done while the bathroom was being fitted
- Cracks in an acrylic bath
- A kit repair that didn’t last
- Chips along the edge of the bath
What to look for in a quote
- When it can be used again
- How changes to the job are handled
- Whether they match the colour on site
- What aftercare is recommended
Bath repair in Chipping Campden, done in place
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. Whether it’s rust spots around the plughole and deep scratches in acrylic, we can help, on whirlpool & spa baths, pressed steel enamel and roll-top & freestanding alike.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.
- Where
- Chipping Campden (GL55)
- County
- Gloucestershire
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
The process
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take two to three hours for most chips, and we leave the room as we found it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
- Let us know about parking or access
How to get a price
If you are in Chipping Campden and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Rust that has eaten right through a steel bath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Prices and what affects them
Prices start from £95. We give every job a fixed quote from pictures. This is what makes a difference:
- The size and number of damaged areas
- Doing more than one item at once
- The material and finish
- Unusual colours or finishes
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Send photos for a quote
Good photos mean an accurate price. Here’s what helps:
- Something in shot to show the size
- A photo taken from further back
- What it’s made of, if you know
- Whether it’s been repaired or coated before
Most clients in Chipping Campden get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Repairing versus replacing in Chipping Campden
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why book with us
- Technicians who travel to you, UK-wide
- A year’s guarantee on all work
- One price list for the whole UK
- Everything repaired in place
Read our pricing or bath cost comparison.
Also near Chipping Campden
Other services in Chipping Campden
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Questions from Chipping Campden
Can a cracked acrylic bath be fixed?
Often, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Can you fix rust around the plughole?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
About Chipping Campden
Chipping Campden is about 7 miles east of Evesham, in Gloucestershire. Wherever you are in the GL55 postcode area, a technician comes to you. Chipping Campden is one of 470 towns and villages in Gloucestershire we cover. We work right across the region, from Chipping Campden to Birmingham (29 miles away).
Jobs in GL55 work the same way as everywhere else we cover. Streets in the area include High Street, Lower High Street and Station Road, all of which we cover. You’ll find Chipping Campden on the B4035 and B4081, which makes it straightforward to reach. We also travel to Broad Campden (1 mile south-east), Northwick Park (2 miles south-east), Ebrington (2 miles east), Paxford (2 miles south-east) and Blockley (3 miles south). Further out, we also cover Bishop's Cleeve (14 miles south-west), Whaddon (15 miles south-west), Moreton-in-Marsh (6 miles south-east), Winchcombe (10 miles south-west), Bourton-on-the-Water (11 miles south) and Oakley (15 miles south-west).
Around Chipping Campden
In Chipping Campden, that means homes near Chipping Campden School, St Catharine's church and St Catharine's Catholic Primary School. The closest station to Chipping Campden is Honeybourne station, roughly 4.2 miles north-west. A little further out are Woolstaplers Hall Museum (under half a mile east). Open spaces near Chipping Campden include Dover's Hill.
Keeping it looking good
To keep it looking its best:
- Get a dripping tap fixed promptly
- Avoid scourers, wire wool and gritty cream cleaners
- Give the bath a quick rinse after use
- Get any new chip repaired before it rusts
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
About our accreditations · Every repair comes with a one-year guarantee.
