Gwynedd · Wales
Bath Repair for Clwt-y-bont homes
Bath repair across Clwt-y-bont and nearby, generally in one visit and guaranteed for a year.
- Repairs from £95
- Snagging damage from a refit
- Rust by the waste and overflow

FAQs for Clwt-y-bont
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Which areas do you work in?
All of Gwynedd, and the rest of the UK. There’s no extra charge for travel.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Can you redo an old repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
How we handle bath repair in Clwt-y-bont
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Our repair technicians work on cast iron enamel, roll-top & freestanding and whirlpool & spa baths, and people most often call us about chips along the edge of the bath and impact holes in acrylic.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.

- Location
- Clwt-y-bont (LL55)
- Region
- Gwynedd
- Guarantee
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Clwt-y-bont
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.
These are the problems we’re asked about most:
- Snagging damage from a refit
- Deep scratches in acrylic
- Cracks in an acrylic bath
- An old repair that has yellowed or come loose
What to look for in a quote
- What happens if they find more damage
- When it can be used again
- How long the guarantee is and what it covers
- What aftercare is recommended
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which generally takes two to three hours for most chips. If we find something your photos didn’t show, we will explain it before carrying on.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the day after.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Keep children and pets away from the room on the day
- Keep a parking space free if you can
Ask for a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.
Advice
Looking after it afterwards
Once the work has cured, treat it gently:
- A dripping tap stains enamel, so fix it early
- Protect the bath with a towel when doing jobs nearby
- Do not leave razors or cans standing in the bath
- Rinse the bath after use, especially in hard water areas
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
Honest limits
Before you book, it’s worth knowing the limits too:
- Cracks in parts of an acrylic bath we can’t get to from below
- A steel bath rusted through
- A whole bath that is dull or worn, where a full re-enamel is the better fix
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
What affects the price in Clwt-y-bont
Repairs from £95. We do not charge extra for travel to Clwt-y-bont. The price depends on:
- The colour and finish to match
- The material and finish
- What kind of damage it is
- Access to the area
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from photos
We price nearly every job from photos. This is what we need:
- Daylight if possible, and no flash reflection
- A photo taken from further back
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Our work in Clwt-y-bont
Clwt-y-bont is about 5 miles south of Bangor, in Gwynedd. Clients in Clwt-y-bont get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Clwt-y-bont is one of 165 towns and villages in Gwynedd we cover. You can also see our page for Liverpool, about 53 miles away.
Every address in LL55 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Deiniolen (1 mile north-east), Gallt-y-foel (1 mile south-east), Brynrefail (1 mile west), Dinorwig (1 mile south-east) and Penisa'r Waun (2 miles north-west). We also work in nearby towns such as Bangor (5 miles north), Caernarfon (6 miles west), Bethesda (4 miles north-east), Hirael (6 miles north), Upper Bangor (6 miles north) and Glanadda (5 miles north).
What’s near Clwt-y-bont
We visit homes around Eglwys Crist (Christ Church), Ysgol Gwaun Gynfi and The Bull Inn. Well-known places in the area include Ysbyty Gwynedd Hospital NHS Trust (4.6 miles north) and Castell Llanddeiniolen (1.7 miles north). Open spaces near Clwt-y-bont include Pen y Bigil and Llyn Padarn.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Gwynedd and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
For anyone letting property in or around Clwt-y-bont, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
Towns and villages near Clwt-y-bont
Other services in Clwt-y-bont
About our accreditations · Every repair comes with a one-year guarantee.

