Hertfordshire · England
Bath Repair in Colliers End
Chip and crack repairs to enamel, acrylic and cast iron baths in Colliers End, carried out at your home and guaranteed for a year.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Scuffs and scratches in the surface
Colliers End questions
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Colliers End.
How long does the repair take to cure?
Normally the day after. We’ll tell you the exact curing time when we finish.
Do you work in Colliers End?
Yes. We work across the UK and travel to Colliers End. Send pictures and we will quote, or call 0345 017 0787.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Can you repair a crack in an acrylic bath?
Generally, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Can you repair something that is been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
Bath repair at your home in Colliers End
We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. Whether it’s chips under the taps and a kit repair that didn’t last, we can generally put it right, whatever the material.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Area
- Colliers End (SG11)
- Region
- Hertfordshire
- Cover
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair cannot fix
We won’t take on work that will not last, so these are the limits:
- Leaking fittings, which need a plumber
- Cracks in parts of an acrylic bath we cannot get to from below
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Acrylic
Colliers End and the surrounding area
Colliers End is about 4 miles north of Ware, in Hertfordshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our technicians cover all 381 towns and villages in Hertfordshire, from the larger towns to small villages. You can also see our page for London, about 26 miles away.
Here we cover the SG11 postcode area. We also travel to Standon Green End (1 mile south-west), Barwick (1 mile south-east), High Cross (1 mile south), Sacombe Green (2 miles west) and Puckeridge (2 miles north-east). We also work in nearby towns such as Stevenage (8 miles west), Bishop's Stortford (7 miles east), Welwyn Garden City (9 miles south-west), Harpenden (15 miles west), Hitchin (13 miles north-west) and Hoddesdon (8 miles south).
Landmarks near Colliers End
Locally, our jobs take us to homes close to The Lamb and Flag pub, St Mary's and Ralph Sadleir Middle School and the streets around them. The closest station to Colliers End is Ware station, about 4.2 miles south. A little further out are Hertford County Hospital (5.9 miles south-west) and Barrowfield (4.9 miles south). Green spaces nearby include King's Meads.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Also near Colliers End
Other services in Colliers End
Repairing versus replacing in Colliers End
Swapping a damaged bath for a new one generally means a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it deals only with the damage in one visit. Prices start from £95. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- Most jobs done in one visit
- Nothing taken out or refitted
- Work done at your home or business
- Honest advice, even when it means no job
Read our prices page and guide to resurfacing and replacement costs.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Aftercare tips
After the repair has cured, a few habits help it last:
- Have new chips seen to early
- Stick to mild cleaners and a soft cloth
- Put a towel in the bath if you’re working above it
- If an acrylic bath flexes, have its feet adjusted
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
What we do, step by step
You don’t need to empty the room. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we are doing. Most jobs take a few hours, depending on the damage, and you can get on with other things while we’re there.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, normally by the next day, the bath is ready to use.
Preparing for the visit
- Tell us about parking, stairs or access
- Have a window or extractor fan available
- Avoid using the area for a few hours before we arrive
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and you are under no obligation.
Related advice
How we price bath repair
Prices start from £95. Every quote is fixed and free. What we look at:
- How easy the damage is to reach
- How hard the colour is to match
- How many items we do on one visit
- The size and number of damaged areas
We charge the same wherever you are, with no extra for Colliers End. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed price
Good pictures mean an accurate price. Here’s what helps:
- A clear, close picture of the problem area
- A wider photo showing the entire bath
- Where you are, by postcode
- A coin or ruler next to the damage for scale
Upload photos of the damage and one of the entire item, and tell us you’re in Colliers End, and we will come back with a fixed quote.
What we are called out for in Colliers End
Rust usually starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Keep an eye out for these signs:
- Scuffs and scratches in the surface
- Snagging damage from a refit
- An old repair that has yellowed or come loose
- A chip where the taps sit
What your quote should include
- The length of the guarantee and what it covers
- A fixed quote, and whether VAT is included
- How your room will be protected
- Whether the price covers travel
About our accreditations · Every repair comes with a one-year guarantee.
