West Sussex · England
Bath chip & crack repair in Colworth, West Sussex
Bath repair in Colworth without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Repairs from £95
- A kit repair that didn’t last
- A hole punched through by something heavy
About our bath repair in Colworth
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Typical jobs include holes from dropped items and a chip where the taps sit, across cast iron enamel, whirlpool & spa baths and roll-top & freestanding.
You get a one-year guarantee, the same in Colworth as everywhere else we work.
- Where
- Colworth (PO20)
- County
- West Sussex
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
How it works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take a few hours, depending on the damage.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the next day.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
Get a quote
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Read more
Colworth and nearby
Colworth is about 2 miles north of Bognor Regis, in West Sussex. Anywhere in PO20, a technician comes to you. Colworth is one of 371 towns and villages in West Sussex where we work. Our jobs stretch from Colworth to London (about 54 miles away).
Here we cover the PO20 postcode area. Other places close to Colworth include Merston (1 mile west), Oving (2 miles north-west), Lagness (2 miles south-west), Runcton (2 miles west) and Shopwyke (2 miles north-west). Larger places within reach include Worthing (13 miles east), Chichester (4 miles north-west), Selsey (7 miles south-west), Littlehampton (8 miles east), Emsworth (10 miles west) and Rustington (9 miles east).
Local landmarks in Colworth
Locally, our jobs take us to homes close to The Brooks Local Nature Reserve, Bartons Primary School and The Regis School, among other places. The closest station to Colworth is Bognor Regis station, about 2.5 miles south-east of the centre. Other landmarks nearby include Bognor Regis Museum (2.7 miles south-east) and Tote Copse Castle (1.3 miles north-east).
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Honest limits
Not everything can be repaired, and we will tell you before we start. Repairs will not solve:
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
- Metal that has corroded all the way through
Not sure? Send photos and we will give you a straight answer.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
Also in Colworth
Landlord and trade work in Colworth
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
If you manage property in Colworth, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Common questions in Colworth
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you cover Colworth?
We do. We send a technician to Colworth for every job, with no extra charge for travel.
Prices and what affects them
Repairs from £95. You will not pay by the hour. The price is based on:
- How many items we do on one visit
- What the surface is made of
- Unusual colours or finishes
- Any earlier repairs that need removing first
Our prices are the same across the UK, so there’s no premium for Colworth. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- What it’s made of, if you know
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
- Where you are, by postcode
Most clients in Colworth get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Signs you need bath repair in Colworth
Rust normally starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
These are the problems we are asked about most:
- Chips on the rim or sides
- A kit repair that didn’t last
- Scuffs and scratches in the surface
- Damage done while the bathroom was being fitted
What to look for in a quote
- Aftercare advice
- How soon you can use it again
- How the colour is matched
- Whether the price covers travel
Repairing versus replacing in Colworth
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- Work done at your home or business
- No need to remove anything
- Colour-matched on site
- One visit for most repairs
Read our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
