Doncaster · England
Bath chip & crack repair in Conanby, Doncaster
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Conanby. Send pictures for a free, fixed quote.
- Repairs from £95
- Chips on the rim or sides
- Cracks in an acrylic bath
Where we work around Conanby
Conanby is about 6 miles north-east of Rotherham, in Doncaster. Jobs in Conanby are booked in like any other job: a fixed price from your pictures, then a visit to do the work. We work in 89 places across Doncaster. You can also see our page for Leeds, about 26 miles away.
Postcode districts we cover here: DN12. Streets in the area include Old Road, Park Road and Prior Road, and we cover them all. Neighbouring places we cover include Conisbrough (1 mile east), Denaby Main (1 mile north-west), Hill Top (1 mile south-west), Old Denaby (1 mile west) and Cadeby (1 mile north-east). Within a short drive, we also cover Doncaster (6 miles north-east), Adwick le Street (7 miles north), Thorne (15 miles north-east), Bentley (6 miles north-east), Armthorpe (9 miles north-east) and New Rossington (7 miles east). Being one of Doncaster’s larger places, Conanby is somewhere we visit often.
Local landmarks in Conanby
Around Conanby, we work in homes near Eagle & Child pub, Morley Place Academy and Fullerton House School. Other local landmarks include Church of St Peter (0.6 miles east) and De Warenne Academy (under half a mile north-east). The closest station to Conanby is Conisbrough station, roughly 0.6 miles north-east of the centre. Well-known places in the area include Montagu Hospital (2.1 miles north-west) and Conisbrough Castle (0.7 miles east). For a walk, there is Denaby Ings.
Bath repair at your home in Conanby
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the day after. We are frequently asked to fix impact holes in acrylic and damage beneath the taps, in pressed steel enamel, roll-top & freestanding and acrylic.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Area
- Conanby (DN12)
- County
- Doncaster
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Conanby
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you work in Conanby?
Yes. We work across the UK and travel to Conanby and the rest of Doncaster. Send pictures and we’ll quote, or call 0345 017 0787.
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
Can a cracked acrylic bath be fixed?
Usually, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
How long before I can use the bath?
Most baths can be used the following day. We confirm the time before we leave.
Should you replace it?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- We’ll tell you if it’s not worth repairing
- A fixed quote before booking
- Same prices wherever you are
- CHAS, Constructionline and SafeContractor accredited
See our prices page and bath cost comparison.
When a repair is not the answer
Before you book, it’s worth knowing the limits too:
- Leaking fittings, which need a plumber
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Rust that has eaten right through a steel bath
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
For landlords and businesses
For anyone letting property in or around Conanby, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
The process
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes two to three hours for most chips. If we find something your pictures didn’t show, we will explain it before carrying on.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the next day.
Getting ready for the visit
- Make sure the area is dry
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
How to get a price
The quickest way to a price is to send two or three photos through our quote form or ring us. We will say right away if a repair is the right fix.
Read more
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Towns and villages near Conanby
More services for Conanby
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Make sure an acrylic bath is firm underfoot
- Rinse it down after each bath
- Protect the bath with a towel when doing jobs nearby
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
What we’re called out for in Conanby
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
You may need us if you’ve spotted any of these:
- Scuffs and scratches in the surface
- A chipped rim or side
- Rust spots around the plughole
- Snagging damage from a refit
What to look for in a quote
- Whether a trained technician does the job
- If travel is included in the price
- What happens if they find more damage
- What prep work is covered
About our accreditations · Every repair comes with a one-year guarantee.
