North Ayrshire · Scotland
Bath Repair for Cordon homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Cordon and across North Ayrshire. Send pictures for a free, fixed quote.
- Repairs from £95
- Rusty patches near the plughole
- A kit repair that didn’t last
About our bath repair in Cordon
Whatever the damage, the aim is the same: a repair that’s smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. If you’re dealing with a chipped rim or side and a cracked acrylic bath, we can usually put it right, on acrylic, cast iron enamel and pressed steel enamel alike.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Cordon (KA27)
- Area hub
- North Ayrshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Cordon
Repairs from £95. Prices are worked out job by job, from your photos. What matters most is:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- The colour and finish to match
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before you book.
How to get a fixed quote
When you take your pictures, a few simple things make all the difference:
- One picture of the whole bath
- Something in shot to show the size
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Also near Cordon
Also in Cordon
When to call us in Cordon
Rust normally starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Customers normally contact us about:
- A cracked acrylic bath
- Chips caused by builders
- An old repair that has yellowed or come loose
- Rust by the waste and overflow
Before you book anyone
- How long the guarantee is and what it covers
- If travel is included in the price
- What aftercare is recommended
- How long it needs to cure
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Cordon: your questions answered
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we’ll plan for it.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
How do I get a price for bath repair in Cordon?
Prices start from £95. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Do you cover Cordon?
Yes. We cover the whole UK and come to Cordon and the rest of North Ayrshire. Send us photos for a fixed quote, or call 0345 017 0787.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Landlords, agents and businesses in Cordon
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
We work for landlords, letting agents and housing providers in Cordon as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Why repair rather than replace?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- One-year guarantee on every repair
- Repair technicians who travel to you, UK-wide
- No need to remove anything
- CHAS, Constructionline and SafeContractor accredited
See our full price list and resurfacing vs replacement cost guide.
Cordon and nearby
Cordon is about 16 miles south-west of Saltcoats, in North Ayrshire. Jobs in Cordon are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Cordon is one of 53 towns and villages in North Ayrshire we cover. Our nearest city page is Glasgow, about 40 miles away.
Jobs in KA27 are booked in the same way as anywhere else. From Monamore Place, McKelvie Road and Glencraig Place or anywhere nearby, we can come to you. We also cover the places around Cordon: Lamlash (1 mile north-east), Strathwhillan (3 miles north), Brodick (3 miles north), Whiting Bay (3 miles south-east) and Drimlabarra (6 miles south). Some remote addresses need extra planning, so call us to arrange it.
Near you in Cordon
Around Cordon, we work in homes near Arran High School and Lamlash and Kilbride Parish Church. A little further out are Arran War Memorial Hospital (1.2 miles north-east) and Isle of Arran Heritage Museum (3.9 miles north). The countryside around Cordon includes Àrd Bheinn and Urie Loch.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
What we do, step by step
You do not need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It generally takes a morning or an afternoon, and you’re welcome to carry on with your day while we work.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Let the surface dry out before the visit
- Keep a parking space free if you can
Ask for a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
Aftercare tips
After the repair has cured, a few habits help it last:
- Do not leave a fresh chip for long
- Ensure an acrylic bath is firm underfoot
- Fix dripping taps early to stop staining and limescale
- Put a towel in the bath if you’re working above it
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
About our accreditations · Every repair comes with a one-year guarantee.
