County Durham · England
Bath chip & crack repair in Cornforth, County Durham
Fixed-price bath repair in Cornforth and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Rusty patches near the plughole
- Damage beneath the taps
How we handle bath repair in Cornforth
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Whether it’s chips caused by builders and scuffs and scratches in the surface, we can help, whatever the material.
Every repair is covered by our one-year guarantee.
- Where
- Cornforth (DL17)
- Region
- County Durham
- Cover
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Cornforth
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Will I be able to see the repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
Will the repair last?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Is a holed acrylic bath repairable?
Typically. Send us a picture of the hole and one from under the bath if you can.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Can I get a quote without a visit?
Usually, yes. Clear photos let us give you a fixed quote without visiting.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
How it works
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and the work begins. It normally takes two to three hours for most chips.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, typically by the next day, the bath is ready to use.
How to prepare
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
- Clear the area around the damage
Ask for a price
For a price in Cornforth, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
What we’re called out for in Cornforth
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
The most common problems we are called about are:
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
- Holes from dropped items
- An old repair that has yellowed or come loose
What to look for in a quote
- What preparation is included
- How the room is protected while they work
- What happens if they find more damage
- How long it needs to cure
Covering Cornforth
Cornforth is about 4 miles east of Spennymoor, in County Durham. We visit customers in Cornforth and the surrounding area, so you do not need to take anything anywhere. Our technicians cover all 329 towns and villages in County Durham, from the larger towns to small villages. You can also see our page for Newcastle upon Tyne, about 21 miles away.
Our repair technicians cover all of DL17. That includes homes on High Street, Station Road and Middleham Road and the roads around them. Nearby, we also work in Metal Bridge (1 mile north-west), Coxhoe (1 mile north-east), Tursdale (1 mile north-west), Thinford (2 miles west) and Hett (3 miles north-west). Within a short drive, we also cover Durham (6 miles north-west), Newton Aycliffe (6 miles south-west), Bishop Auckland (7 miles south-west), Spennymoor (4 miles west), Seaham (11 miles north-east) and Chester-le-Street (11 miles north).
Local landmarks in Cornforth
Typical jobs here are in homes near Church of the Holy Trinity and West Cornforth Primary School, among other places. Further afield, we also cover the area around Thornlaw (3.9 miles north-east) and Sherburn Hospital (4.6 miles north).
Landlord and trade work in Cornforth
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Should you replace it?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- No extra charge for your area
- One visit for most repairs
- CHAS and Constructionline accredited
- Technicians who travel to you, UK-wide
See our full price list and guide to resurfacing and replacement costs.
DIY kit or professional repair?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Keeping it looking good
So the finish stays in good condition:
- Put a towel in the bath if you’re working above it
- A dripping tap stains enamel, so fix it early
- Keep metal cans and razors off the surface
- Clean with warm water and a mild detergent
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.
Nearby places to Cornforth
More services for Cornforth
How we price bath repair
Prices start from £95. We don’t charge extra for travel to Cornforth. The price depends on:
- How many areas need work
- The material
- Access to the area
- Doing more than one item at once
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what helps:
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- The material, if you know it
Send us a picture of the damage and a wider shot of the entire item, and tell us you are in Cornforth, and we’ll reply with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
