East Ayrshire · Scotland
Bath chip & crack repair in Crosshouse, East Ayrshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Crosshouse, with a one-year guarantee on every repair.
- Repairs from £95
- Rust spots around the plughole
- A kit repair that didn’t last
Repair or replace: which is better?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Prices start from £95. We charge the same wherever you are, with no extra for Crosshouse. The job itself decides the price: the material, the amount of damage and how many items.
Why choose Surface Doctor in Crosshouse
- Accredited with CHAS, Constructionline and SafeContractor
- Everything repaired in place
- We come to you, anywhere in the UK
- One visit for most repairs
Take a look at our prices page and resurfacing vs replacement cost guide.
Bath repair in Crosshouse, done in place
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath. You can typically use the bath the day after. We regularly repair whirlpool & spa baths, cast iron enamel and pressed steel enamel, and the jobs we see most are an old repair that has yellowed or come loose and chips on the rim or sides.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Location
- Crosshouse (KA2)
- Area hub
- East Ayrshire
- Warranty
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Towns and villages near Crosshouse
More services for Crosshouse
When a repair isn’t the answer
A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:
- Metal that has corroded all the way through
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Cracks in parts of an acrylic bath we can’t get to from below
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Prices and what affects them
Prices start from £95. Prices are worked out job by job, from your pictures. The main factors are:
- Access to the area
- Any earlier repairs that need removing first
- The size and number of damaged areas
- Unusual colours or finishes
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
Good photos mean an accurate price. Here’s what we find most useful:
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- Details of any past repairs
- Where you are, by postcode
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
What we do, step by step
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take two to three hours for most chips. We tidy up before we leave and let you know when you can use it again.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the following day.
How to prepare
- Make sure the room can be ventilated
- Make sure the area is dry
- Mention if the room is upstairs or in a flat
Ask for a price
The quickest way to a price is to send two or three photos using our quote form or call us. We’ll say right away whether it can be repaired.
Related advice
Our work in Crosshouse
Crosshouse is about 2 miles west of Kilmarnock, in East Ayrshire. Clients in Crosshouse get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Our repair technicians cover 53 places in East Ayrshire, from the larger towns to small villages. We work right across the region, from Crosshouse to Glasgow (about 20 miles away).
We cover every part of the KA2 postcode area and the streets around it. That includes homes on Playingfield Road, Annandale Lane and Annandale Gardens. We also travel to Knockentiber (1 mile north), Bonnyton (1 mile east), Annanhill (1 mile east), Springside (2 miles west) and Lady's Well (2 miles north-east). We also work in nearby towns such as Stewarton (5 miles north), Galston (7 miles east), Mauchline (9 miles south-east), New Farm Loch (3 miles east), Darvel (10 miles east) and Newmilns (9 miles east).
Landmarks near Crosshouse
We visit homes around Grange Academy and Crosshouse Parish Church and the streets around them. Crosshouse’s nearest station is Kilmaurs station, about 1.9 miles north-east. Other landmarks nearby include University Hospital Crosshouse (0.5 miles east) and Busbie Castle (0.6 miles north). The countryside around Crosshouse includes Caprington Loch.
Common problems we fix in Crosshouse
Glass and heavy bottles cause more chips than anything else. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
People generally call us when they notice something like this:
- Holes from dropped items
- Damage done while the bathroom was being fitted
- An old repair that has yellowed or come loose
- A chip where the taps sit
Questions to ask before booking
- How long it needs to cure
- Who turns up on the day
- Whether the price is fixed and includes VAT
- Aftercare advice
Crosshouse questions
How do I book?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can you repair a hole in a bath?
Typically, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Can a cracked acrylic bath be fixed?
Frequently, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your photos and you’ll get one combined price.
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Which areas do you work in?
We work UK-wide, so Crosshouse is covered. Prices don’t change with location.
About our accreditations · Every repair comes with a one-year guarantee.
