Sheffield · England
Bath Repair in Darnall
Fixed-price bath repair in Darnall and the surrounding area, usually in one visit.
- Repairs from £95
- Impact holes in acrylic
- A kit repair that didn’t last
Bath repair at your home in Darnall
Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. We work on acrylic, roll-top & freestanding and whirlpool & spa baths, and people most frequently call us about a chip where the taps sit and holes from dropped items.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Location
- Darnall (S9, S2, S13)
- Area hub
- Sheffield
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
What bath repair costs
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- The material
- How easy the damage is to reach
- The type of damage
- Whether we combine several jobs
A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book.
How to get a fixed quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Natural light rather than flash
- Details of any past repairs
- Where you are, by postcode
- A wider photo showing the entire bath
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Where we work around Darnall
Darnall is about 2 miles east of Sheffield, in Sheffield. From the centre of Darnall to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 118 towns and villages in Sheffield, from the larger towns to small villages. You can also see our page for Leeds, about 30 miles away.
Every address in S9, S2 and S13 is covered, from the main roads to the quietest streets. We regularly work on streets such as Main Road, Goore Road and Lound Road. Darnall is on the A630 and A6102, so it’s easy for us to reach. Other places close to Darnall include Carbrook (1 mile north-west), Handsworth (1 mile south-east), Manor (1 mile south-west), Woodthorpe (1 mile south) and Attercliffe (1 mile north-west). Further out, we also cover Netherthorpe (3 miles west), Upperthorpe (3 miles west), West End (3 miles west), Walkley (4 miles west), Broomhall (3 miles west) and Chapeltown (6 miles north-west).
What’s near Darnall
We visit homes around Sheffield Park Academy, The Ball Public House and UTC Sheffield Olympic Legacy Park. You will also find High Hazels Park (0.6 miles north-east), Church Of Christ (under half a mile north) and Acres Hill Community Primary School (less than half a mile west). Darnall has its own railway station: Darnall station. A little further out are Sheffield Teaching Hospital (2.7 miles west) and Sheffield Castle (2.2 miles west).
- Parks and local facilities nearby include Arbourthorne (1.9 miles south-west)
Repair or replace in Darnall?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. Repairing it deals only with the damage in a single visit. Prices start from £95. Our prices are the same across the UK, with no extra for Darnall. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- Straight answers about what a repair can do
- Everything repaired in place
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
Read our prices page and resurfacing vs replacement cost guide.
Darnall: your questions answered
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Is there a call-out fee?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- A dripping tap stains enamel, so fix it early
- Rinse the bath after use, especially in hard water areas
- Cover the bath during DIY or decorating
- Do not leave razors or cans standing in the bath
A repaired bath needs no special treatment. Skip bleach and gritty creams and rinse after use.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What we are called out for in Darnall
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
The things clients normally mention when they call are:
- Rust spots around the plughole
- A failed DIY repair that’s discoloured or lifting
- Impact holes in acrylic
- Scratches you can feel with a fingernail
What to look for in a quote
- What happens if the damage is worse than the photos show
- How long the guarantee is and what it covers
- How to look after the finish
- How soon you can use it again
Nearby places to Darnall
More services for Darnall
When we’d advise against a repair
To be straight with you, there are a few things a repair will not fix:
- A bath worn all over, where resurfacing makes more sense
- A steel bath rusted through
- Flexing caused by a failed cradle or loose feet
If in doubt, send pictures and we will say what we think before you book.
Materials we repair
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
How it works
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll get on with it. Most visits take a few hours, depending on the damage, including clearing up.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can typically use the bath the day after.
How to prepare
- Mention any earlier repairs or resurfacing
- Keep a parking space free if you can
- Let the surface dry out before the visit
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
