Sheffield · England

Bath chip & crack repair in Dore, Sheffield

Bath repair for Dore, without a refit. Get a fixed price from your photos, then book a visit.

  • Repairs from £95
  • Impact holes in acrylic
  • Damage done while the bathroom was being fitted
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Dore?

Why repair rather than replace?

People often assume a cracked or chipped bath has to come out. In most cases it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.

Why choose Surface Doctor in Dore

  • Accredited with CHAS, Constructionline and SafeContractor
  • Everything repaired in place
  • Technicians who travel to you, UK-wide
  • We leave the room as we found it

Take a look at our pricing or guide to resurfacing and replacement costs.

How we handle bath repair in Dore

Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. We work on whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and common reasons people contact us are a chip where the taps sit and chips along the edge of the bath.

All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Before and after: a chipped, rust-stained bath around the plughole
Area
Dore (S17)
Region
Sheffield
Warranty
A year, on every repair
Price
From £95. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026

What we’re called out for in Dore

A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.

The things clients typically mention when they call are:

  • A chipped rim or side
  • Hairline or through cracks in acrylic
  • A chip where the taps sit
  • Deep scratches in acrylic

Questions to ask before you book

  • Whether the price covers travel
  • Who will actually do the work
  • How long the guarantee is and what it covers
  • How changes to the job are handled

Our hiring checklist

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Different materials, different repairs

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.

Our work in Dore

Dore is about 3 miles north-west of Dronfield, in Sheffield. Clients in Dore get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Dore is one of 118 towns and villages in Sheffield we cover. Our jobs stretch from Dore to Manchester (about 30 miles away).

Our visits in S17 work the same way as everywhere else we cover. Streets in the area include Drury Lane, Church Lane and Kerwin Road, all of which we cover. If you are just outside Dore, we cover Totley Brook (1 mile south-east), Long Line (1 mile north-west), Totley (1 mile south), Abbeydale Industrial Hamlet (1 mile east) and Whirlow (1 mile north-east). Larger places within reach include Sheffield (4 miles north-east), Netherthorpe (5 miles north-east), Upperthorpe (5 miles north-east), West End (4 miles north-east), Walkley (5 miles north) and Broomhall (4 miles north-east).

What’s near Dore

Our customers here include homes close to Dore Primary School, Whinfell Quarry Garden and King Ecgbert School, among other places. Dore’s nearest station is Dore & Totley station, about 1 mile east. Further afield, we also cover the area around Nether Edge Hospital (2.9 miles north-east) and Ecclesall Bierlow (2.6 miles north-east). For a walk, there is Blacka Moor Nature Reserve and Totley Moor.

Map of Dore © OpenStreetMap contributors

How we price bath repair

Repairs from £95. You’ll know the full cost before booking. We look at:

  • How many areas need work
  • The colour and finish to match
  • The material and finish
  • Whether it’s a chip, crack, burn or wear

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.

Quotes from your photos

Before you send photos, a few simple things make all the difference:

  • One picture of the whole bath
  • Your postcode, so we can check dates
  • The material, if you know it
  • Daylight if possible, and no flash reflection

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.

Honest limits

Before booking, it’s worth knowing the limits too:

  • Water coming from the waste or taps rather than the bath
  • Cracks in acrylic we cannot reach from underneath
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Send us pictures and we will tell you honestly.

What we work on

  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding

Common questions in Dore

How long before I can use the bath?

Typically within a day, depending on the repair.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit. The rest of the house is unaffected.

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

What happens if you find more damage?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

What happens once I’ve sent pictures?

We check the damage, the material and your postcode, then reply with a quote with dates.

Is there any odour?

A little, depending on the job. Ventilation keeps it to a minimum.

Do you come to Dore?

Yes. We cover the entire UK and come to Dore and the rest of Sheffield. Send pictures and we’ll quote, or call 0345 017 0787.

Can you fix rust around the plughole?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

The process

It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a morning or an afternoon. If we find something your photos didn’t show, we’ll explain it before carrying on.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, generally the following day.

Before we arrive

  • Keep pets and children out of the room while we work
  • Let us know about parking or access
  • Have somewhere for us to park nearby if possible

How to get a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a fixed quote

Read more

Aftercare tips

It’s all simple stuff, just a few sensible habits:

  • Rinse the bath after use, especially in hard water areas
  • Clean with warm water and a mild detergent
  • Check that an acrylic bath doesn’t move when you stand in it
  • Get any new chip repaired before it rusts

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.