East Riding of Yorkshire · England
Bath chip & crack repair in Drewton, East Riding of Yorkshire
We travel to Drewton for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Impact holes in acrylic
- A cracked acrylic bath
Keeping it looking good
Aftercare is simple:
- Don’t leave a fresh chip for long
- A dripping tap stains enamel, so fix it early
- Keep metal cans and razors off the surface
- Rinse it down after each bath
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
About our bath repair in Drewton
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. Whether it’s hairline or through cracks in acrylic and a chip where the taps sit, we can normally put it right, whatever the material.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Drewton (HU15)
- County
- East Riding of Yorkshire
- Warranty
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Drewton: your questions answered
Can you repair a crack in an acrylic bath?
Generally, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across East Riding of Yorkshire.
What does bath repair cost?
Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Is my repair covered?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
How the visit works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a few hours. We clean up when we’re done and let you know when you can use it again.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
- Keep a parking space free if you can
How to get a price
If you are in Drewton and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Advice
How we price bath repair
Prices start from £95. There’s no area surcharge for Drewton. The price reflects:
- How easy the damage is to reach
- How hard the colour is to match
- How much damage there is
- How many items we do on one visit
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send photos for a quote
You can usually get a fixed quote without us visiting. To make it quick:
- One sharp close-up of the damage
- Any earlier repairs or coatings
- A wider photo showing the entire bath
- The material, if you know it
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Our work in Drewton
Drewton is about 8 miles south-west of Beverley, in East Riding of Yorkshire. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Drewton is one of 299 towns and villages in East Riding of Yorkshire we cover. Our nearest city page is Leeds, about 39 miles away.
Our repair technicians cover all of HU15 and the streets around it. We also travel to Everthorpe (1 mile south-west), South Cave (1 mile south), North Cave (2 miles west), Hotham (2 miles north-west) and Ellerker (2 miles south). Larger places within reach include Beverley (8 miles north-east), Goole (12 miles south-west), Pocklington (12 miles north-west), Hessle (8 miles south-east), Cottingham (7 miles east) and Market Weighton (6 miles north-west).
Near you in Drewton
The nearest railway station is Brough station, roughly 4.2 miles south of the centre. Other landmarks nearby include Cave Castle (1.3 miles south). For a walk, there is North Cave Wetlands.
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Places near Drewton
What else we do in Drewton
Signs you need bath repair in Drewton
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
These are the problems we are asked about most:
- Deep scratches in acrylic
- Holes from dropped items
- A chipped rim or side
- Rusty patches near the plughole
What your quote should include
- How the colour is matched
- Whether cleaning and preparation are in the price
- What happens if the damage is worse than the pictures show
- How to look after the finish
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
Why book with us
- Repair technicians who travel to you, UK-wide
- Fixed prices from your photos
- One visit for most repairs
- Every repair guaranteed for a year
Take a look at our prices page and resurfacing vs replacement cost guide.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
