Essex · England

Bath Repair in Duton Hill

Bath repair in and around Duton Hill: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Holes from dropped items
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Duton Hill

Where we work around Duton Hill

Duton Hill is about 8 miles north-east of Bishop's Stortford, in Essex. We visit clients in Duton Hill, so nothing has to leave your home. Duton Hill is one of 644 places in Essex where we work. Our jobs stretch from Duton Hill to London (about 34 miles away).

Here we cover the CM6 postcode area. We also travel to Tilty (1 mile south-west), Great Easton (1 mile south), Chickney (1 mile west), Sibley's Green (1 mile north-east) and Monk Street (1 mile north-east). Further out, we also cover Chelmsford (14 miles south-east), Braintree (10 miles east), Harlow (14 miles south-west), Witham (15 miles south-east), Saffron Walden (8 miles north-west) and Halstead (13 miles east).

Near you in Duton Hill

Around Duton Hill, we work in homes near The Rising Sun Public House, Putteridge High School and Church of St Mary the Virgin, among other places. Duton Hill’s nearest station is Stansted Airport station, roughly 3.5 miles south-west of the centre. A little further out are Little Easton Moat (2 miles south). The countryside around Duton Hill includes West Wood.

Map of Duton Hill © OpenStreetMap contributors

Bath repair in Duton Hill, done in place

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on roll-top & freestanding, whirlpool & spa baths and acrylic, and the jobs we see most are an old repair that has yellowed or come loose and deep scratches in acrylic.

You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.

Location
Duton Hill (CM6)
Region
Essex
Guarantee
One year on every repair
Price
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

How to look after the repair

Much of the damage we repair could have been avoided. A few tips:

  • Protect the bath with a towel when doing jobs nearby
  • Don’t leave a fresh chip for long
  • If an acrylic bath flexes, have its feet adjusted
  • Clean with warm water and a mild detergent

Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.

A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.

Common problems we fix in Duton Hill

Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move until it cracks.

People generally call us when they notice one of these:

  • A cracked acrylic bath
  • A chipped rim or side
  • Rust spots around the plughole
  • A chip where the taps sit

Before booking anyone

  • When it can be used again
  • Who turns up on the day
  • If travel is included in the price
  • What happens if they find more damage

Our hiring checklist

What we do, step by step

We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and we start. You can expect it to take two to three hours for most chips, and we will keep you posted as we go.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, normally the following day.

Getting ready for the visit

  • Ensure the room can be ventilated
  • Clear the area around the damage
  • Ensure the area is dry

Getting a price

We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Get a fixed price

Advice

How we price bath repair

Repairs from £95. Quotes are free and the price is fixed. What we look at:

  • Whether it’s a chip, crack, burn or wear
  • How much damage there is
  • Doing more than one item at once
  • How easy the damage is to reach

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Send pictures for a quote

Almost every job we do is priced from pictures. This is what to send:

  • A picture taken from further back
  • Details of any past repairs
  • A close-up of the damage, in focus
  • Any details about the material

For a price in Duton Hill, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Work for landlords and builders

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.

We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.

When we would advise against a repair

A repair is not right for every job, including:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • A bath worn all over, where resurfacing makes more sense
  • Leaking fittings, which need a plumber

Not sure? Send photos and we will give you a straight answer before booking.

Surfaces we repair

  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Acrylic

Duton Hill: your questions answered

Do you cover the whole of Essex?

The whole UK, including all of Essex. Send your postcode with your pictures and we will offer you dates.

Can rust on a bath be repaired?

Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.

Can you repair something that is been repaired before?

In most cases. The old repair comes out first.

How do I book?

Send pictures through the quote form or call 0345 017 0787.

Is there any odour?

It depends on the job, but frequently a little. Ventilation keeps it to a minimum.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

What if the damage is worse than the pictures show?

We will show you and explain before doing anything extra. Nothing extra is done without your say-so.

When can I have a bath again?

Typically within a day, depending on the repair.

What your bath is made of matters

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.

Why repair rather than replace?

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.

Why book with us

  • Technicians who travel to you, UK-wide
  • Rooms protected and left tidy
  • Same prices wherever you are
  • Nothing taken out or refitted

Read our prices page or resurfacing vs replacement cost guide.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.