Surrey · England
Bath Repair for Esher homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Esher, with a one-year guarantee on every repair.
- Repairs from £95
- Rusty patches near the plughole
- Holes from dropped items
Bath repair in Esher, done in place
Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. We are often asked to fix a hole punched through by something heavy and chips on the rim or sides, on whirlpool & spa baths, roll-top & freestanding and pressed steel enamel.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.
- Location
- Esher (KT10, KT7, KT8)
- County
- Surrey
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Esher
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Common questions in Esher
How do I get a price for bath repair in Esher?
Prices start from £95. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo with your KT10 postcode.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Surrey.
What happens once I’ve sent pictures?
We come back with a fixed price, plus dates. You’re under no obligation.
Something went through my bath. Can it be fixed?
Usually. Send us a picture of the hole and one from under the bath if you can.
What happens if you find more damage?
Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
When a repair is not the answer
Some jobs are not right for a repair, including:
- Acrylic cracks with no access behind them
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
Aftercare tips
To keep it looking its best:
- Rinse the bath after use, especially in hard water areas
- If an acrylic bath flexes, have its feet adjusted
- A dripping tap stains enamel, so fix it early
- Use a soft cloth and washing-up liquid for everyday cleaning
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. A repair keeps it in place. Our bath repair starts from £95. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why Esher customers choose us
- No need to remove anything
- Work done at your home or business
- One visit for most repairs
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page or resurfacing vs replacement cost guide.
How it works
There’s not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to a few hours, depending on the damage, tidy-up included.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the day after.
Getting ready for the visit
- Make sure the area is dry
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Related advice
Covering Esher
Esher is about 5 miles north-west of Epsom, in Surrey. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Esher is one of 395 towns and villages in Surrey we cover. Our jobs stretch from Esher to London (15 miles away).
We work across the KT10, KT7 and KT8 postcode area. Streets in the area include High Street, Station Road and Warren Close, all of which we cover. Main roads around Esher include the A244 and A307, which makes travel easy. Neighbouring places we cover include West End (1 mile south-west), Lower Green (1 mile north), Hinchley Wood (1 mile east), Claygate (1 mile south-east) and Weston Green (1 mile north-east). Within a short drive, we also cover Guildford (12 miles south-west), Woking (10 miles west), Epsom (5 miles south-east), Redhill (12 miles south-east), Ewell (5 miles east) and Egham (9 miles north-west).
Around Esher
Typical jobs here are in homes near Milbourne Lodge School, Albert Arms and Esher Church of England High School. Nearby too are Esher Church School (within half a mile south), Claremont Park (0.9 miles south) and St George's Church (within half a mile south-west). For rail, the closest station is Esher station, about 0.8 miles north-east. Other landmarks nearby include Elmbridge Museum (less than half a mile east) and Bentall Centre (3.9 miles north-east). Green spaces nearby include Jubilee Wood and The Lake.
- Local facilities include Municipal Borough of Surbiton (2.9 miles east)
What we’re called out for in Esher
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Common reasons people in Esher contact us include:
- A chipped rim or side
- Scuffs and scratches in the surface
- Hairline or through cracks in acrylic
- Damage done while the bathroom was being fitted
What your quote should include
- What happens if the damage is worse than the photos show
- Who will actually do the work
- A fixed price, and whether VAT is included
- How your room will be protected
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
More services for Esher
About our accreditations · Every repair comes with a one-year guarantee.
