East Sussex · England
Bath chip & crack repair in Fairlight, East Sussex
Bath repair across Fairlight and nearby, generally in one visit and guaranteed for a year.
- Repairs from £95
- Snagging damage from a refit
- Chips along the edge of the bath
What bath repair costs
Repairs from £95. You will know the full cost before you book. We look at:
- Whether old repairs or coatings need taking off
- The material and finish
- Access to the area
- Whether we combine several jobs
The price reflects the work involved, not where you live. You will see the full price before you book, with nothing added on the day.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- A photo taken from further back
- Something in shot to show the size
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Bath repair at your home in Fairlight
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the day after. We are often asked to fix a failed DIY repair that’s discoloured or lifting and rust spots around the plughole, in roll-top & freestanding, pressed steel enamel and cast iron enamel.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.
- Area
- Fairlight (TN35)
- Region
- East Sussex
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When we’d advise against a repair
We’ll always be straight with you, so here’s what a repair won’t do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
If in doubt, send photos and we will say what we think.
What we work on
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
Repair or replace in Fairlight?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Fairlight
- CHAS and Constructionline accredited
- Colour mixed on the day to match
- One visit for most repairs
- Repair technicians who travel to you, UK-wide
Take a look at our pricing or bath cost comparison.
Fairlight and the surrounding area
Fairlight is about 4 miles east of Hastings, in East Sussex. Anywhere in TN35, we come to you. Fairlight is one of 289 places in East Sussex we cover. Our jobs stretch from Fairlight to London (about 54 miles away).
Our visits in TN35 are booked in the same way as anywhere else. Local streets include Hill Road, The Close and Lower Coastguard Lane, all of which we cover. Close by, we cover Fairlight Cove (1 mile east), Friar's Hill (1 mile north), Guestling (1 mile north-west), Bachelor's Bump (1 mile west) and Guestling Green (1 mile north-west). Further out, we also cover Hastings (4 miles west), Bexhill-on-Sea (8 miles west), St Leonards (4 miles west), Hastings Old Town (3 miles south-west), Belmont (3 miles south-west) and Langney (15 miles west).
What’s near Fairlight
Locally, our jobs take us to homes close to The Hastings Academy, The Parish Church of St Andrew and Speckled Wood and the streets around them. The nearest railway station is Three Oaks station, about 2.2 miles north-west. Nearby you’ll also find Hastings Old Town Hall Museum (2.7 miles south-west) and Conquest Hospital (3.4 miles west). Not far away are Church Wood and Robsack Wood.
Common problems we fix in Fairlight
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
People normally call us after spotting something like this:
- Scratches you can feel with a fingernail
- Rust spots around the plughole
- A chipped rim or side
- Damage beneath the taps
Questions to ask before booking
- What the guarantee covers, and for how long
- What happens if the damage is worse than the pictures show
- Whether the colour is mixed to match
- When it can be used again
Work for landlords and builders
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Fairlight: your questions answered
Will I be able to see the repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Can you repair a crack in an acrylic bath?
Often, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Something went through my bath. Can it be fixed?
Usually, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Are there extra charges for Fairlight?
There is no separate call-out charge. Your fixed quote includes everything.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Is a repair better than a new one?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Do you come to Fairlight?
We do. We send a technician to Fairlight for every job, with no extra charge for travel.
Aftercare tips
So the finish stays in good condition:
- Avoid scourers, wire wool and gritty cream cleaners
- Get any new chip repaired before it rusts
- Rinse the bath after use, especially in hard water areas
- Cover the bath during DIY or decorating
Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
What happens on the day
We work cleanly and quietly. We protect the area first, then the job itself takes two to three hours for most chips. At the end we talk you through how soon it can be used and how to look after it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Tell us about parking, stairs or access
- Keep children and pets away from the room on the day
- Have a window or extractor fan available
Ask for a price
To get a price, send two or three pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Advice
Nearby places to Fairlight
More services for Fairlight
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
