Cornwall · England
Bath Repair for Falmouth homes
Our repair technicians come to Falmouth for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Rusty patches near the plughole
- A kit repair that didn’t last
Do you need bath repair in Falmouth?
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
Signs it’s time to call us include:
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
- Cracks in an acrylic bath
- An old repair that has yellowed or come loose
Questions to ask before you book
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
- Whether there are any call-out or travel charges
- How the colour is matched
About our bath repair in Falmouth
A typical bath repair is a few hours’ work, and the bath is back in use the next day. There is no need to book a plumber or tiler, because nothing is disconnected. We work on cast iron enamel, roll-top & freestanding and pressed steel enamel, and common reasons people get in touch are holes from dropped items and chips on the rim or sides.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Location
- Falmouth (TR11)
- Area hub
- Cornwall
- Warranty
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What bath repair costs
Repairs from £95. A fixed quote means you know the cost before booking. We take into account:
- Previous DIY repairs that have to come out
- The material and finish
- Doing more than one item at once
- Unusual colours or finishes
The price reflects the work involved, not your postcode. The full price is agreed before you book.
Send photos for a quote
Almost every job we do is priced from pictures. This is what to send:
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- The material, if you know it
If you’re in Falmouth and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Other services in Falmouth
Can I fix it myself?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Where we work around Falmouth
Falmouth is in Cornwall. We travel to customers in Falmouth and the surrounding area, so you don’t need to take anything anywhere. Falmouth is one of 644 towns and villages in Cornwall we cover.
Postcode districts we cover here: TR11. From Market Strand, High Street and Market Street or a nearby road, a technician can come to you. With the A39 close by, Falmouth is simple for us to get to. Neighbouring places we cover include Gyllyngvase (1 mile south-east), Boslowick (1 mile south-west), Mongleath (1 mile west), Flushing (1 mile north-east) and Tregew (1 mile north). We also work in nearby towns such as Truro (8 miles north), Camborne (10 miles north-west), Redruth (9 miles north-west), Helston (9 miles west), Hayle (15 miles west) and Rosewarne (11 miles north-west). As one of the bigger places in Cornwall, Falmouth sees plenty of our work.
Near you in Falmouth
In Falmouth, that means homes near The Seven Stars pub, Marlborough School and Falmouth School. Falmouth has its own railway station: Penmere station. Nearby you will also find Falmouth Community Hospital (within half a mile north-west) and Penryn Museum (1.5 miles north-west).
What a repair can’t fix
A repair isn’t right for every job, for example:
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
If in doubt, send pictures and we will say what we think.
Materials we work on in Falmouth
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
Landlords, agents and businesses in Falmouth
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
The process
Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. Allow a few hours, and we’ll keep you posted as we go.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
- Point us to the nearest place to park
Get a quote
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Read more
FAQs for Falmouth
Will the price change on the day?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Do the materials smell?
Expect a mild smell while we’re working.
Can you repair something that’s been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Why repair rather than replace?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. A repair keeps it in place. Prices start from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- A fixed quote before you book
- One price list for the entire UK
- One visit for most repairs
- Straight answers about what a repair can do
Take a look at our pricing or resurfacing vs replacement cost guide.
Repairs by material
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
About our accreditations · Every repair comes with a one-year guarantee.
