Hertfordshire · England
Bath chip & crack repair in Farnham, Hertfordshire
Fixed-price bath repair in Farnham and the surrounding area, generally in one visit.
- Repairs from £95
- Damage beneath the taps
- A cracked acrylic bath
Bath repair in Farnham, done in place
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. Common call-outs are for chips caused by builders and rust by the waste and overflow, in whirlpool & spa baths, cast iron enamel and pressed steel enamel.
All our work is covered by our one-year guarantee.
- Location
- Farnham (CM23)
- Region
- Hertfordshire
- Cover
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Check that an acrylic bath does not move when you stand in it
- Use a soft cloth and washing-up liquid for everyday cleaning
- Don’t leave razors or cans standing in the bath
- Do not scrub with anything abrasive
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
Common problems we fix in Farnham
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
You may need us if you’ve spotted any of these:
- Rust by the waste and overflow
- A chipped rim or side
- Chips caused by builders
- A chip where the taps sit
What to look for in a quote
- Aftercare advice
- Whether they match the colour on site
- What protection goes down before work starts
- When it can be used again
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
What we can’t put right
We won’t take on work that won’t last, so these are the limits:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Cracks in acrylic we cannot reach from underneath
- Metal that has corroded all the way through
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Common questions in Farnham
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
How long before I can use the bath?
Normally by the following day, though it depends on what we’ve done.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
What areas do you cover?
We cover the whole UK, including Farnham and the rest of Hertfordshire. Just include your postcode and we’ll offer you dates.
What affects the price in Farnham
Prices start from £95. Every quote is fixed and free. What we look at:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed price
Most quotes are done from photos alone. To help us price it:
- Where you are, by postcode
- A photo taken from further back
- Details of any past repairs
- Something in shot to show the size
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Our work in Farnham
Farnham is about 2 miles north of Bishop's Stortford, in Hertfordshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. We cover all 381 towns and villages in Hertfordshire. We work right across the region, from Farnham to London (about 30 miles away).
Our repair technicians cover all of the CM23 postcode area. If you are just outside Farnham, we cover Uppend (1 mile north), Mount Pleasant (1 mile north), Manuden (2 miles north-east), Bentfield Green (2 miles east) and Stansted Mountfitchet (2 miles east). Within a short drive, we also cover Stevenage (14 miles west), Hoddesdon (12 miles south-west), Hertford (12 miles south-west), Ware (10 miles south-west), Baldock (15 miles north-west) and Broxbourne (13 miles south-west).
What’s near Farnham
Our clients here include homes close to Farnham Church of England Primary School, Church of St Mary the Virgin and St Mary's Catholic School. Farnham’s nearest station is Stansted Mountfitchet station, about 2.4 miles east. A little further out are Moated mound (1.7 miles south-west) and Herts and Essex Hospital (2.8 miles south-east). Open spaces near Farnham include Portingbury Hills and Aubrey Buxton Nature Reserve.
Why repair rather than replace?
Many people think a damaged bath means a new one. Normally it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Farnham
- Usually one visit, start to finish
- We will tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- A year’s guarantee on all work
Take a look at our full price list or resurfacing vs replacement cost guide.
Towns and villages near Farnham
What else we do in Farnham
What we do, step by step
We agree an arrival time beforehand. Once we’re there, the work takes two to three hours for most chips for most jobs. We leave the room clean and ready to use once it has cured.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
